on 17-03-2024 21:16
I have tried just about everything to set up my Eero mesh with my hub 3 but cannot get an internet connection. When I first set up the Eero and connect it to the rear of the hub 3 with the Ethernet cable provided it connects to the internet OK but as soon as I turn the Virgin hub 3 to modem mode I lose all connection and everything that I have tried up to now hasn’t made any difference. I previously had the Eero set up with a Sky hub and had no problems so I would be grateful for any help as this has me tearing my hair out not that I have any to tear out.
Answered! Go to Answer
on 19-03-2024 11:44
I have finally managed to get everything up and running. I did the installation as was suggested but first I completely reset and rebooted my Eero and this made all the difference as it set up easily after that. It was I realised in bridge mode and when it was reset it went back to automatic. I had a Sky hub before and it has to be in bridge mode for it to work but I switched to Virgin as the speeds I was getting with sky were only 20 MB/s, no fibre where I live and Virgin have only just installed there cable which is obviously a lot faster. Thanks for all the help.