on 08-09-2021 18:30
Hi everyone,
so heres my problem. Just recently switched over from SKY where i was able to send a RF signal to TV in dinning room and kitchen. So with the VM install I new this would be an issue to bought the following kit. HDMI splitter connected to HDMI to RCA adapter connected to a LB gear MOD121 RC to RF modulator connected via old COAX to tv's on other rooms.
I know the splitter and converter work as if I connected it to a TV with an RCA input i get a decent picture. For the life of me I can not get the RF signal to work on the other TV's. I would assume the HDCP issume would have been resolved by the hdmi to RCA conversion as the RCA works for me when connected to the TV with RCA input.
Any suggestions much appreciated.
Thanks
on 08-09-2021 20:26
My suggestion is to dump the TV and get a full HD TV replacement with an HDMI input as what you are trying to do will always be fraught with problems and will never give a good result anyway.
As for connecting the TV to the TV box: there are various options depending on the distance.
on 09-09-2021 00:02
on 09-09-2021 14:39
on 09-09-2021 16:02
The HDCP on VMs boxes, particularly V360 is very fussy on what you connect. Ideally everything in the chain must be HDCP 2.2 compliant (4K standard encryption).
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks