on 16-01-2022 19:38
What port on the modem remains active when it is placed in modem-only mode.
on 16-01-2022 19:56
You can, I believe, use any of them.
on 16-01-2022 19:58
Whichever one you are plugged into at the point of power on.
You can actually use more than one for load balancing.
on 16-01-2022 21:19
OK, thanks, I did have a SH3 and about to upgrade to a SH4 to use the 1Gbps service. The SH3 only allowed 1 port to operate in modem only mode. I connected this to a Asus router with improved Wifi and other network controls the SH3 didn't have.
16-01-2022 21:22 - edited 16-01-2022 21:23
@abtrooper82 wrote:OK, thanks, I did have a SH3 and about to upgrade to a SH4 to use the 1Gbps service. The SH3 only allowed 1 port to operate in modem only mode. I connected this to a Asus router with improved Wifi and other network controls the SH3 didn't have.
Yeah, with standard third party routers you can only see a maximum of around 940Mbps of the potential 1130Mbps from the VM HUB in modem mode due to the 1Gbps ethernet ports.
on 16-01-2022 21:23
Indeed 🙂