Wifi and upload nightmare issues.
Across all our devices for the last 4 months wifi connected devices are intermittently not loading, they just drop off to mobile data or say connected no Internet. We are on the gig bundle. When doing Sam knows tests all looks fine but it's not. The engineers even experienced it when here. When doing speed test downloads speeds are fine but errors out on upload. Had 3 engineer visits, a new hub a new booster, One engineer said he found a ghost network. Even when all hubs etc where off still showing the network. It's driving us crazy, wifi tvs connect and seconds later lose the network again. As do all mobile devices, laptops etc... Any help or suggestions would be very much appreciated14Views0likes1CommentGetting under 100mbps through TPlink router plugged into Hub 3
I recently purchased a TP Link AC1200 as I was unhappy with the wifi reliability of the Virgin Hub 3. I pay for the 250Mb Virgin package and prior the installation of the router I was getting almost that speed through Hub3 Wifi (albeit with an unreliable connection). Since connecting the TP Link router to the Hub 3 I am now getting under 100Mb from the wifi through the new router. I understand this is because the Hub3 network ports only provide a 100Mb speed therefore this is the max i would be able to get through the connected TP Link router. What would be my best way forward to get the speed that I am paying for (up to 250Mb) through the TP Link router, as I want the speed plus the reliable connection.Solved2.2KViews0likes10CommentsHow to get Hub5 and wifi pods
Hi, I just renewed contract with Gig 1 fiber , however i am facing issues with Wifi in parts of the house (1st floor and rear of the house). First I don't see a way to request a replacement of the Hub 4 for a Hub5 (never understood why i had a Hub4 in first place) and second the VM app is dumb and says i don't have a Hub or can't recognize it so no way to order pods. Calling the 0345 number just get me going circles until it disconnects. Anyone could help me?179Views0likes2CommentsReplacement HUB not recognised on VM Connect App
Hi, please can someone help me Today I was given a replacement Hub (Hub 5.0 not "x") but my VM Connect App will not recognise it no matter what I do, I have followed all instructions, I have even rebooted and reset, I have also cleared the app's data and cache, signed out and back in again and still it won't recognise the new hub, it even tells me to connect my phone to the WiFi, which it already is connected to my new Hub 5.0 so not even sure why it gives this error? Any Help is Much Appreciated ThanksSolved416Views0likes7CommentsWi-fi but no wired connection
Had a Hub 3.0 for a couple of years and it was working perfectly. Recently, the wired connections no longer work, but wi-fi does. Tried the long press reset for 90 seconds, and it connects through wired for a few seconds during the end of the start up phase, then disconnects again. Any suggestions appreciated!239Views0likes4CommentsVM connect cant find hub 4
My VM connect app can't find my hub 4. I've tried all the tips in the community e.g. resetting the hub, deleting and re-loading the app etc but nothing is working. I want it to help manage screen time for my son so I can disconnect wifi to certain devices.405Views0likes3Comments2.4Ghz not working on hub 4
My hub 4 has no 2.4Ghz working. I've had this hub for a year now and it is only when trying to connect devices that only use 2.4Ghz I have realised it's not working. I am to believe it's a faulty hub as the router manager says 2.4Ghz is broadcasting when its obvious it isn't. I've done all the usual trouble shooting. Even a full factory reset to see if that has helped and this has caused 2.4Ghz to now transmit for maybe 5 to 10 minutes after a reset then disappears again. 5Ghz seems to work fine. Any help would be appreciated8.6KViews0likes40CommentsCannot load HUB 4 settings via '192.168.0.1', page is unresponsive on all devices.
Hi, We have been experiencing slow speeds for our Hub 4 wi-fi, supposedly on the 1GB package. We are seeing speeds of about 150-200mbps. Regardless of this, I thought the slowness could have been caused by some hub settings, so I did a factory reset (3 times now, firstly via settings page, and then twice using the reset pin on the hub itself), and I am now unable to load the hub settings page post-login. It times out and says the page is unresponsive. Due to this I now cannot change my SSID or passwords, or split out the networks into 2G and 5G channels. Any help would be appreciated.Solved7.8KViews0likes42CommentsCannot connect to hub 5
I have tried everything, resetting the hub, disconnecting and reconnecting cables etc. however my VM Connect App cannot find the hub + my WiFi pods won't work and are continously flashing. Note - internet is working fine! No changes to have cause this but this has been the case for a few weeks now. Any suggestions on a fix please? Thank you!637Views0likes6Comments