Community FAQ
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Connecting to WiFi

Gaz22
Joining in

on ‎24-03-2024 14:28

Hi all need some help. I have aVM hub 5 set on modem mode and 3 deco X20 mesh set up. The problem is connecting Phillips Wizz lights. When the app checks the network “ broadcast (UDP) on local network “ fails. I did manage to connect one bulb but wouldn’t connect any more. Then when I disconnected it if wouldn’t reconnect. Any help would be appreciated so long as it’s not to complicated 🙂🙂

0 Kudos
3 REPLIES 3

jbrennand
Very Insightful Person
Very Insightful Person

on ‎24-03-2024 14:38

Is the Deco system broadcasting a single SSID - or have you separated them into two - 2.4 & 5 GHz ?

If one try separating them and to force the lights to connect on the 2.4 only band.


--------------------
John
--------------------

I do not work for VM. My services: HD TV on VIP (+ Sky Sports & Movies & BT sport), x3 V6 boxes (1 wired, 2 on WiFi) Hub5 in modem mode with Apple Airport Extreme Router +2 Airport Express's & TP-Link Archer C64 WAP. On Volt 350Mbps, Talk Anytime Phone, x2 Mobile SIM only iPhones.
0 Kudos

Gaz22
Joining in
In response to jbrennand

on ‎25-03-2024 09:23

they are on the same but I went into the app and turned the 5 ghz off but it made no difference 

0 Kudos

legacy1
Alessandro Volta

‎25-03-2024 12:29 - edited ‎25-03-2024 12:31

Not a VM problem try 

TP-Link Community

unless its a routing issue  

---------------------------------------------------------------

BQM, Test for outgoing ports and SSL/L2TP VPN test

0 Kudos
Top