Menu
Reply
Joining in
  • 2
  • 0
  • 0
Registered: ‎19-05-2017
Message 1 of 4 (243 Views)

new tv

I have a v6 tv box and am purchasing a new tv will I need to set anything up ,like tune in my remote or will I just need to plug the cables into my new sdt

Reply
0 Kudos

Accepted Solutions
Superuser
  • 8.6K
  • 574
  • 1.7K
Registered: ‎01-03-2010
Message 2 of 4 (414 Views)
Helpful Answer
confirmed by williamsme
‎27-05-2017 05:41

Re: new tv

You'd need to program the Virgin remote to control the volume and standby on your set (if you use the Virgin remote and not a universal one)

 

plug the V6 into a 4K port if you have a 4K tv and you should be good to go

 






See where this Helpful Answer was posted


All Replies
Superuser
  • 8.6K
  • 574
  • 1.7K
Registered: ‎01-03-2010
Message 2 of 4 (415 Views)
Helpful Answer
confirmed by williamsme
‎27-05-2017 05:41

Re: new tv

You'd need to program the Virgin remote to control the volume and standby on your set (if you use the Virgin remote and not a universal one)

 

plug the V6 into a 4K port if you have a 4K tv and you should be good to go

 






Joining in
  • 2
  • 0
  • 0
Registered: ‎19-05-2017
Message 3 of 4 (162 Views)

Re: new tv

How do I do that

Reply
0 Kudos
Rising star
  • 520
  • 42
  • 124
Registered: ‎05-10-2016
Message 4 of 4 (120 Views)

Re: new tv


williamsme wrote:

How do I do that


1. Go to Home > Help & Settings > Settings > Devices > Remote Control Pairing.

2. Press and hold the Info button for 7 seconds until the light at the top of
the remote goes solid green then flashes green twice.


Or, by using the V6 box and remote:

Press the Channel Down button on the front of the V6 box for 10 seconds
Then, hold the Info button down on the remote for 7 seconds. The light on the top of the remote will flash green twice

Reply
0 Kudos