VM Connect App and Hub5
Since my Hub3 was replaced a few weeks ago by a new Hub5, the VM Connect App has stopped working properly. The Connect App doesn’t show my WiFi details, or my Network Devices (other than with an exclamation mark in a triangle) or my WiFi devices. All I get are messages “Oops! Something went wrong “ or “something went wrong on our side” and “Contact support if this message keeps appearing “ Help please, preferably from a VM Moderator.Solved139Views0likes11CommentsAtom restart failure
Hi hub 3, I keep getting frequent disconnects which aligns to green WiFi light flashing. Running the test I get "intermittent issues reported" but then they resolve. looking at logs I have a lot of these around the time of the disconnections; "NOTICE ATOM is restarted due to Kernel/oops panic as part of Self Healing Mechanism" What is the next step? A replacement or router upgrade? I'm on a 350mb service. Thanks111Views0likes10CommentsFirst wifi pod has not given my house full coverage (Gig1 package)
I have just moved into a new house which has struggled for connection throughout the house. We had a wifi pod delivered which has partially improved the issue but there are still areas of the house with little to no connection. I did the wifi speed tests on the Connect App but don't have the option to order additional pods. I read we need to have had the first pod for a certain amount of time for this option? Considering there are still areas of the house with zero connection I think this matter is fairly urgent but I can't seem to find any urgent remedies. I was told that this package (Gig1) means I am eligible for more pods so I don't know why their is no option to order them. Very disappointed with the VM experience so far, starting to wish I considered BT.55Views0likes6CommentsCritical error in Hub while in Modem Mode
Hub 5, set to modem mode. Mesh connected and works perfectly for hours. Sudden loss of wifi, unable to resolve until modem is turned off and on at wall. This will repeat twice within a short time frame, then return to functioning. The Hub has been replaced. Attaching logs below Timestamp Level Message 02-09-2025 14:48:16 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=6c:ff:ce:fe:13:30;CMTS-MAC=00:01:5c:74:68:67;CM-QOS=1.1;CM-VER=3.1; 02-09-2025 14:48:19 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=6c:ff:ce:fe:13:30;CMTS-MAC=00:01:5c:74:68:67;CM-QOS=1.1;CM-VER=3.1; 02-09-2025 14:48:23 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=6c:ff:ce:fe:13:30;CMTS-MAC=00:01:5c:74:68:67;CM-QOS=1.1;CM-VER=3.1; 02-09-2025 14:48:28 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:48:28 critical 16 consecutive T3 timeouts while trying to range on upstream channel 2;… 02-09-2025 14:48:28 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;… 02-09-2025 14:49:53 critical Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;… 02-09-2025 14:51:50 critical Cable Modem Reboot because of - HW or Power-On Reset 02-09-2025 14:51:52 critical SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;… 02-09-2025 14:52:15 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:52:16 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:52:32 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;… 02-09-2025 14:52:33 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:52:34 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:52:34 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;… 02-09-2025 14:52:34 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;… 02-09-2025 14:52:34 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:53:17 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:53:41 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 14:54:29 critical 16 consecutive T3 timeouts while trying to range on upstream channel 0;… 02-09-2025 14:54:29 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;… 02-09-2025 14:54:29 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out;… 02-09-2025 15:05:46 critical Cable Modem Reboot because of - HW or Power-On Reset 02-09-2025 15:05:49 critical SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;… 02-09-2025 15:05:56 notice Honoring MDD; IP provisioning mode = IPv4 02-09-2025 15:05:59 warning DHCP WARNING - Non-critical field invalid in response;… 02-09-2025 15:06:01 notice TLV-11 - unrecognized OID;… 02-09-2025 15:06:05 notice DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3.;… 02-09-2025 15:06:14 warning RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW;… 02-09-2025 15:06:19 notice REGISTRATION COMPLETE - Waiting for Operational status262Views0likes25CommentsExtending connectivity across circuits
Hi. We have had an extension built and power in the new part of the house is on a different circuit different consumer unit/fuse box. I’m looking to move my study into a room in the new bit but the WiFi is not completely reliable (maybe due to being on the other side of the old external double skin wall). What’s the best way for me to do this? I have some dlink plugs to put Ethernet over the mains, but as it’s a different circuit this doesn’t work… and a long Ethernet cable down the corridor isn’t ideal (I have a Hub5). Many thanks DanSolved100Views0likes7CommentsTV losing connection since upgrading to 360 service
So I accepted the upgrade of my TV service too the 360 box. Since then wherever I try to watch streaming TV services, the WiFi connection drops out wherever the adverts come on! I'm thinking the issue is the router that can't cope.. The WiFi signal around the house is good(I have Tenda mesh system) Also the TV confirmed that it's connected to the WiFi but the connection drops out intermittently. I have also noticed VPN drops out when I'm working from home. Can someone check my router? I have the super hub 3 i think it's called.i also have 500mb service and only help 100 mb died downstairs....(But that's not the problem) Can't someone help... Do I need a newer router with the 360 TV service?56Views0likes6CommentsHub 5x issues on firmware 7.8.3-2410.5
Hi, Since my Hub 5x auto-updated to firmware 7.8.3-2410.5 (around 20/08/25), my broadband has become unreliable for online gaming. What’s happening: - Games disconnect after 2–10 minutes, every time. - This happens on multiple devices (Iphone and Samsung Galaxy S25 Ultra). - General browsing and streaming seem fine, but anything that relies on a stable connection drops out. - Pings sometimes show duplicate replies and big spikes in latency. What I’ve tried: - Disabled Smart WiFi and split 2.4 GHz / 5 GHz into separate networks. - Locked 5 GHz to channel 36–48 at 80 MHz. - Changed DNS to Google and Cloudflare. - Tested MTU (1472 works fine). - Tried keepalive scripts to hold the connection open. - VPN fixes the problem completely (but obviously I shouldn’t need to use one just to play games). This only started after the 7.8.3-2410.5 update. Before that, everything was stable. Can you confirm if this is a known issue with the latest Hub 5x firmware, and if there’s a fix or workaround? It looks like the router is mishandling online gaming traffic. Thanks.400Views1like16Comments