Hub 3.0 overheating llight (RED) go red after few seconds after rebooting
Hi, We started to have few issues with our network and I am coming to conclusion its the HUB 3.0 overheating as the LED reports RED all the time and when rebooted it goes purple for few seconds and then red again , while the speed stay constant for over 300Megabits, we get quiet ofted what appers to be dropout in network where everything feezes and then comes back again this is happening both via wifi and wired network, sometimes even I get notification on my work laptop that status of my network has changed. I've tried to run diagnostics on the HUB 3 but with the FW changes now you can't monitor temperature on it, the the diagnostics recomends checking temperature it dosn't report it anymore. The casing of the hub is warm to touch but that dosn't directly indicate its overheating The setup is HUB3.0 in modem mod only netgear passive switch 1gbps for ethernet plugs around home and mess network with Archer C80 and RE605X hotspots I just started network mnonitor <a title="Broadband Ping" href="https://www.thinkbroadband.com/broadband/monitoring/quality/share/b26ce463c31e865108bfc94f3e5ed84b1757f49f">My Broadband Ping</a>
Red light on hub 3.0
Hi, Hub 3.0 either has a red light or a dark/burnt orange colour light. I have read this is an overheating LED issue. I have tried a pinhole reset, power cycling and checking the environment. It's not near any heat sources and is not covered or hot to touch, and I have used the Network Diagnostic Tool which states that the hub temperature is "Normal", in spite of the red light. This keeps happening and has happened for many months now. Is it possible for someone to arrange a replacement hub for me please? ThanksHub3 red light permanently on
I was trying to log in to admin a couple of days ago; it kept either saying bad password or appearing to accept it but then returning to the main menu; eventually it told me to reset the machine which I did; I was able to get into admin but the response time was even slower than normal and the router could not tell that one computer was connected (even though said computer was connected through this); in fact only about five of twenty-odd devices (most of them low bandwidth IoT devices) were detected. At that point I noticed the red light was solidly on and the router was running very hot. I turned the router off overnight and it is cooler today but still a bit warmer than I'd expect; the red light has not gone off. For months/years the admin pages has been much more sluggish than other (low-end) routers I've used , but this might be normal for hub3. Performance wise, the game server can no longer receive incoming connections, and NOW TV, BBC and a number of other sites keep dropping out. Virgin's own speed test puts my speed at a respectable 85mbits/s but two definitely-independent checkers both come in at more like 15mbits/s.Hub 3.0 overheating
Hi! Had the light on my hub 3.0 seemingly go from the normal white, via shades of orange, to a really bright red. Decided to research tonight and found it it’s supposedly an overheating light. Felt the router and it did seem extremely hot. I’ve done the suggested of resetting, making sure it’s ventilated etc. but nothing seems to set it back to proper functioning. From the other posts it seems like it might have to be a router replacement. Wondering if anyone can help me. thanks, Dan
