Random resetting to Router mode (should be modem mode)
My GIG 1 package has been active for a while now and on a number of occasions (at least 4) the modem is 'resetting' itself to Router mode witht he most recent one being today. It takes a complete reset to 'undo' and reconfigure in modem mode….. this feels like a fault with my HUB5…… can anyone from the VM team help resolve this or provide a new HUB?? ThanksIp address change frequency
I have been with virgin for 12+ years and in that time the IP address has been fairly stable. my best estimate is that it has changed every couple of years. For work I need have my IP address whitelisted to access certain services so the 'semi static' (ie dynamic) has never been an issue however in the last 6 weeks the IP address has changed twice which is becoming a bit inconvenient. I've spoken to virgins support and they said that the IP address is set to change every 15 days "for security reasons". Does anyone know if this is correct? Is it a new policy? It doesn't sound right. I realise virgin don't offer fixed IPs on there domestic connections (if they did I'd happily pay) but a new IP every 15 days is going to be unworkable. Does anybody know anything about this?Unifi UXG Lite settings + Modem 5x 10gig
Super excited to get Virgin into the property (only 6-7 weeks late without internet..that's another story) and I was happily surprised with the plug-and-play nature of connecting the UXG Lite to the 10Gig port (yes, 10Gig, I honestly was expected 2.5gig). My issue happened when I set the Virgin Hub into modem mode (thank you to the person - sorry, I didn't record the name! - who shared the link as it's not available in the GUI (http://192.168.0.1/?page=modemmode), where post reboot and green LED, going to 192.168.100.1, went to nowhere. Checked Unifi and I could see that the G2 Plus can see the internet. It sees that there is the potential for a connection, but no joy on actually getting the connection. Context: Previously used PPPoE with BT G.Fast Changed to DHCP under IPv4 (v6 disabled) I had seen mention of choosing VLAN 6 for it to work..no joy Are there any specific settings USG, UDM or UXG users are using or can share for connecting in Modem-only mode?