cancel
Showing results for 
Search instead for 
Did you mean: 

Slow Broadband - Afternoon and evenings

DaveEagles
Tuning in

I have M350 fibre

Can anyone shed any light as to why in the mornings my broadband speed is OK e.g. 215mbps but from around 1500 onwards I get about 30mbps?

There is only my wife and myself connected, no kids gaming etc.

The timings of the slowdown though suggest some capacity issues at certain times of the day.

I've reset the router etc

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

jbrennand
Very Insightful Person
Very Insightful Person

If it actually is a VM network "capacity" issue causig this it will be evident and show in a BQM - so can you set one up...

Also is this only evident on wifi connections or do you see them at the same times on devices connected on ethernet cables? If you don't know, can you check on one to help diagnose whether it is just a wifi issue or it could be network connection/Hub related?

Might also be worth checking for any "known issues".  Try the “free & automated” Service Status number - 0800 561 0061 - which usually gives the most up to date info. and tells you of more local issues and fix estimates, down to street cab/ postcode level.

_______________________

Set up a free, secure and “offlsite” - “Broadband Quality Monitor” to continually monitor the state of your connection and record any true network dropouts , latency issues, packet drops, etc - it will thus allow you to differentiate between those and simple wifi dropouts. It does it 24/7/365 and it keeps a visual record of any/all of your network disconnections, useful data to have to match to the Network logs (in your Hub settings) and also in discussions with VM - note it will take a few hours to start seeing a sensible picture - post up the “link” to the “share live graph”. Click the lower link (Share Live Graph) then, click generate. Copy the text in the Direct Link box, beware, there may be more text than you can see. On here click the Link icon (2 links chain to the left of the camera icon) In the URL box paste the link you copied and then click OK
https://www.thinkbroadband.com/broadband/monitoring/quality


--------------------
John
--------------------

I do not work for VM. My services: HD TV on VIP (+ Sky Sports & Movies & TNT sport), x3 V6 boxes (1 wired, 2 on WiFi), Hub5 in modem mode with Apple Airport Extreme Router +2 Airport Express's & TP-Link Archer C64 WAP. On Volt 350Mbps, Talk Anytime Phone, x2 Mobile SIM only iPhones.

See where this Helpful Answer was posted

12 REPLIES 12

jbrennand
Very Insightful Person
Very Insightful Person

If it actually is a VM network "capacity" issue causig this it will be evident and show in a BQM - so can you set one up...

Also is this only evident on wifi connections or do you see them at the same times on devices connected on ethernet cables? If you don't know, can you check on one to help diagnose whether it is just a wifi issue or it could be network connection/Hub related?

Might also be worth checking for any "known issues".  Try the “free & automated” Service Status number - 0800 561 0061 - which usually gives the most up to date info. and tells you of more local issues and fix estimates, down to street cab/ postcode level.

_______________________

Set up a free, secure and “offlsite” - “Broadband Quality Monitor” to continually monitor the state of your connection and record any true network dropouts , latency issues, packet drops, etc - it will thus allow you to differentiate between those and simple wifi dropouts. It does it 24/7/365 and it keeps a visual record of any/all of your network disconnections, useful data to have to match to the Network logs (in your Hub settings) and also in discussions with VM - note it will take a few hours to start seeing a sensible picture - post up the “link” to the “share live graph”. Click the lower link (Share Live Graph) then, click generate. Copy the text in the Direct Link box, beware, there may be more text than you can see. On here click the Link icon (2 links chain to the left of the camera icon) In the URL box paste the link you copied and then click OK
https://www.thinkbroadband.com/broadband/monitoring/quality


--------------------
John
--------------------

I do not work for VM. My services: HD TV on VIP (+ Sky Sports & Movies & TNT sport), x3 V6 boxes (1 wired, 2 on WiFi), Hub5 in modem mode with Apple Airport Extreme Router +2 Airport Express's & TP-Link Archer C64 WAP. On Volt 350Mbps, Talk Anytime Phone, x2 Mobile SIM only iPhones.

Thanks I’ll give the BQM a try

jbrennand
Very Insightful Person
Very Insightful Person

Will take 24h to develop the full picture... post back when you have that image (black out the  ip address).


--------------------
John
--------------------

I do not work for VM. My services: HD TV on VIP (+ Sky Sports & Movies & TNT sport), x3 V6 boxes (1 wired, 2 on WiFi), Hub5 in modem mode with Apple Airport Extreme Router +2 Airport Express's & TP-Link Archer C64 WAP. On Volt 350Mbps, Talk Anytime Phone, x2 Mobile SIM only iPhones.

DaveEagles
Tuning in

Hi,

The monitor has been running for around 22 hours, it has generated date but I have no idea what this means.Monitor 27-28 Feb.jpg

DaveEagles
Tuning in

Also a gyazo shot of ad hoc speedtests which look a bit haphazard to me

https://gyazo.com/44f718923c82d1428b6da3c51607cc48

jbrennand
Very Insightful Person
Very Insightful Person

OK no evidence of overutiliastion in your area - otherwise it would look like this....

https://community.virginmedia.com/t5/Forum-Archive/Jitter-and-latency/m-p/4609932#M378967

So its probable the issue is due to something specific to you (or a few users)  So to start to pin that down can you say whether your issues are only evident on wifi connections - or do you see them at the same times on devices connected on ethernet cables? If you don't know, can you check on one to help diagnose whether it is just a wifi issue or it could be network connection/Hub related?

]Lets look at you connection data too - do this.....

In your browser’s URL box type in http://192.168.0.1 (or http://192.168.100.1 - if in modem mode) (DONT click these links) - and hit return. No need to log in - just click on the “Router Status” icon/text at bottom-middle (Hub3/4/5) or top/right (SH’s) - of the Login page.
Then… Navigate to these “data pages” and just copy/paste the normal “Formatted Text” (not images) 3 FULL sets of data onto here – 2 tables from the Downstream, 2 from the Upstream, & the Network Logs pages. Don't worry too much about the formatting it can be easily read & DON’T include personal data or MAC addresses - blank them out - if you copy/paste the data, the board software will do this for you (you may need to click the "submit" button again). If character limits are “exceeded” - just do two posts


--------------------
John
--------------------

I do not work for VM. My services: HD TV on VIP (+ Sky Sports & Movies & TNT sport), x3 V6 boxes (1 wired, 2 on WiFi), Hub5 in modem mode with Apple Airport Extreme Router +2 Airport Express's & TP-Link Archer C64 WAP. On Volt 350Mbps, Talk Anytime Phone, x2 Mobile SIM only iPhones.

DaveEagles
Tuning in

Thanks again John,

I'm not sure that I've done what you asked correctly.

I could only see (1) Configure WiFi Network (2) Network Diagnostic Tool and (3) Modify Guest Network.

I selected 2 and got this

Your home network has a few problems.

 

 

 Checking Broadband Service

 Checking Ethernet Connections

 Checking WiFi Connections

If you still think something is wrong, please check the following

1              Gateway IPv4 address is valid.

2              Your broadband connection is down.

3              The temperature of your Hub 3.0 is normal.

4              The device 9e:xxxxxxxxxxxx has low signal strength, please move it closer to Hub 3.0.

5              The device 1c: xxxxxxxxxxxx has low signal strength, please move it closer to Hub 3.0.

6              The device 8e: xxxxxxxxxxxx has low signal strength, please move it closer to Hub 3.0.

7              The device 6a: xxxxxxxxxxxx has low signal strength, please move it closer to Hub 3.0.

8              The device 8c: xxxxxxxxxxxx has low signal strength, please move it closer to Hub 3.0.

9              Please place your WiFi device near the Hub 3.0.

I think devices 4 to 8 are phones and IPads and we never notice if response is bad.

My laptop isn't one of the devices above and its connected via WiFi probable 5 metres away with nothing in between the router.

DaveEagles
Tuning in

Sorry I have just realised what info you asked for

Downstream bonded channels

Channel               Frequency (Hz) Power (dBmV)  SNR (dB)              Modulation        Channel ID

1              331000000           4.1          38           256 qam               25

2              139000000           2.5          37           256 qam               1

3              163000000           2.5          38           256 qam               4

4              171000000           2.5          37           256 qam               5

5              195000000           2.5          37           256 qam               8

6              203000000           2.2          38           256 qam               9

7              227000000           2.5          38           256 qam               12

8              235000000           2.5          38           256 qam               13

9              243000000           2.7          38           256 qam               14

10           251000000           2.9          38           256 qam               15

11           259000000           3              38           256 qam               16

12           267000000           3.2          38           256 qam               17

13           291000000           3.7          38           256 qam               20

14           299000000           4              38           256 qam               21

15           307000000           4              38           256 qam               22

16           315000000           3.9          38           256 qam               23

17           323000000           4              38           256 qam               24

18           339000000           4.1          38           256 qam               26

19           347000000           4.3          38           256 qam               27

20           355000000           4              38           256 qam               28

21           363000000           4              38           256 qam               29

22           371000000           3.5          38           256 qam               30

23           387000000           3              38           256 qam               32

24           491000000           4.6          38           256 qam               33

 

 

Downstream bonded channels

Channel               Locked Status    RxMER (dB)        Pre RS Errors      Post RS Errors

1              Locked  38.9        152         88

2              Locked  37.3        1308       97

3              Locked  38.9        317         94

4              Locked  37.6        346         65

5              Locked  37.6        304         87

6              Locked  38.6        334         89

7              Locked  38.6        280         215

8              Locked  38.9        187         177

9              Locked  38.9        172         93

10           Locked  38.9        221         73

11           Locked  38.6        274         88

12           Locked  38.6        158         98

13           Locked  38.6        181         87

14           Locked  38.9        188         110

15           Locked  38.9        120         172

16           Locked  38.6        216         145

17           Locked  38.6        200         70

18           Locked  38.9        228         86

19           Locked  38.6        189         71

20           Locked  38.9        150         91

21           Locked  38.9        176         188

22           Locked  38.9        173         95

23           Locked  38.6        160         92

24           Locked  38.6        232         70

DaveEagles
Tuning in

Upstream bonded channels

Channel               Frequency (Hz) Power (dBmV)  Symbol Rate (ksps)         Modulation        Channel ID

1              36600000             42.2        5120       64 qam 11

2              23600000             42.3        5120       64 qam 13

3              30100000             42.3        5120       64 qam 12

4              43099993             42.3        5120       64 qam 10

5              49600019             42.3        5120       64 qam 9

 

 

Upstream bonded channels

Channel               Channel Type    T1 Timeouts       T2 Timeouts       T3 Timeouts       T4 Timeouts

1              ATDMA                0              0              0              0

2              ATDMA                0              0              0              0

3              ATDMA                0              0              0              0

4              ATDMA                0              0              0              0

5              ATDMA                0              0              2              0