on 21-01-2024 11:09
I recently upgraded to a Superhub 5. All devices in the house can connect to it and access the internet, but my Windows 11 PC cant. The Windows 11 PC connects to the router, and has been using internet with no issues - but this morning when I turned my mahcine on, I could connect to the wifi network, but no internet.
I've tried the following:
1. Rebooted the Router
2. Rebooted the PC
3. Checked PC for latest Wifi Card Drivers
4. Confirmed that other devices in the house can connect to router and use the internet (they can)
5. Connected the PC to another Wifi Network to verify the wifi card works (it does)
6. Flushed the DNS Cache on my Windows 11 machine
7. Logged into the virgin media hub and confirmed the device is online - all looks fine
8. Confirmed I have a good wifi signal between the hub and the Windows PC
9. If i use a wired ethernet connection between hub and PC, then I get internet - but I need wifi
10. Used the windows network troubleshooter & reset the network adapter on the machine
Help!!
Answered! Go to Answer
on 30-01-2024 10:16
To anyone viewing this thread in-future with a similar issue:
I don't like it when issues magically solve themselves, but I think what might have fixed this issue for me was actually pinging the router (as suggested by one of the kind contributors to this post)
Open command prompt (windows key then type cmd) and ping the router.
just type ping 192.168.0.1
I dont know enough about networking to explain why this worked for me - but that seemed to weirdly fix the problem. Good luck!
on 21-01-2024 12:54
Did you check in the HUB settings to see if the MAC address has become filtered for some reason?
21-01-2024 18:47 - edited 21-01-2024 18:49
Make sure your Windows 11 PC is connected to WiFi, then open a Command Prompt and enter the following commands:
ping 192.168.0.1
then try
ping 8.8.8.8
then try
ping google.com
Let us know the results of the pings.
on 25-01-2024 00:20
Hello, thanks for your reply. MAC filtering is always on, but there is nothing in the list. (it looks identical to your screenshot).
on 25-01-2024 00:26
Hi Thanks for your reply.
For no reason i can tell, my pc is now able to access the internet again. I read online that this could be a DNS issue.
before my issue mysteriously went away - I was able to ping the router, but not google.com (request timed out)
on 25-01-2024 10:09
Thanks for updating.
For future reference, if you're able to ping 8.8.8.8 but unable to ping google.com, it means your internet connection is fine but the DNS server is broke.
I have no idea what kind of DNS server infrastructure VM has, but I imagine it to be a very old and poorly maintained system. If you have problems again I'd try switching to a proper DNS service.
on 30-01-2024 10:16
To anyone viewing this thread in-future with a similar issue:
I don't like it when issues magically solve themselves, but I think what might have fixed this issue for me was actually pinging the router (as suggested by one of the kind contributors to this post)
Open command prompt (windows key then type cmd) and ping the router.
just type ping 192.168.0.1
I dont know enough about networking to explain why this worked for me - but that seemed to weirdly fix the problem. Good luck!
on 01-07-2024 22:55
I have the same issues that all devices can connect to VM wifi but only windows devices cant.
It shows device is connected but might not be able to access anything on the network.
Tried ping 192.168.0.1 and came back:
PING: transmit failed. General failure.
Any tech-savvy person can kindly advise any possible solutions?
p.s. tried all steps listed above.
on 04-07-2024 16:41
Hi @Notechsavvy
Welcome to our community forums and sorry to hear you are having issues when trying to connect your Windows devices to your Network. We can understand the frustration caused and we want to best help. Just to confirm, when did this issue first occur? Have you made any recent changes to your network? Also, what is the specific error code you get when trying to connect ?
Thanks,