Forum Discussion

Geezertronic's avatar
Geezertronic
Tuning in
17 hours ago

WiFi pod not working

I have been sent one of the crème coloured WiFi pods which the limited instructions say to plug on, give it 10 mins, and it should work.  The light on mine keeps flashing and the VM Connect app says it is offline.  I tried relocating the pod to within a couple of metres away from the router just to see if it would connect but it still doesn’t work.  I also tried to remove and re-add it  via the VM Connect app but it wont re-add.

There seems to be limited support for getting these working, would anyone know where I could look next please?

Thanks

Broadband
WIFI

1 Reply

  • newapollo's avatar
    newapollo
    Very Insightful Person
    13 hours ago

    The Hub must be in 'Router Mode' and not have been changed to 'Modem Mode'
    Channel Optimisation must be left on
    The SSIDs must be the same and broadcast enabled
    The SSID must be password protected
    The Passphrases of the SSIDs must match
    As long as all of the above points are all met then the Pods shouldl automatically connect to your Hub's WiFi and begin broadcasting. The wireless details from the Pods will be the same as the Hub's details, so no additional steps are required to connect up the devices in the home.

    It's also possible that the pod needs pairing to your account/hub.  To do this you would need to call the equipment activation number on 0800 953 9500. You will need the model numbers, serial numbers/MAC addresses off the barcode stickers of all pieces of kit and also your account number.