Errors shown on hub5
having problems today with network being slow / dropping out. The log file contains the following.
Do i have a problem? Do I need an engineer call out?
Nick
| 05-11-2025 20:53:44 | notice | GUI Login Status - Login Success from LAN interface |
| 05-11-2025 20:15:57 | warning | DBC-REQ Mismatch Between Calculated Value for P1.6hi Compared to CCAP Provided Value;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:57 | notice | US profile assignment change. US Chan ID: 6; Previous Profile: 13; New Profile: 11 13.;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:53 | notice | REGISTRATION COMPLETE - Waiting for Operational status |
| 05-11-2025 20:15:46 | warning | RNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:46 | warning | Dynamic Range Window violation |
| 05-11-2025 20:15:46 | warning | REG-RSP-MP Mismatch Between Calculated Value for P1.6hi Compared to CCAP Provided Value;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:41 | notice | DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3.;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:37 | notice | TLV-11 - unrecognized OID;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:35 | warning | DHCP WARNING - Non-critical field invalid in response ;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:33 | notice | Honoring MDD; IP provisioning mode = IPv4 |
| 05-11-2025 20:15:22 | critical | No Ranging Response received - T3 time-out;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:16 | critical | SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=[REMOVED] |
| 05-11-2025 20:15:14 | critical | Cable Modem Reboot because of - HW or Power-On Reset |
| 05-11-2025 17:50:59 | critical | No Ranging Response received - T3 time-out;CM-MAC=[REMOVED] |
| 05-11-2025 17:50:53 | critical | Cable Modem Reboot because of - Reboot Timezone Change |
| 05-11-2025 17:50:53 | critical | SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=[REMOVED] |
| 05-11-2025 17:48:15 | critical | No Ranging Response received - T3 time-out;CM-MAC=[REMOVED] |
| 05-11-2025 17:48:11 | critical | SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=[REMOVED] |
| 05-11-2025 17:48:09 | critical | Cable Modem Reboot because of - HW or Power-On Reset |
| 14-10-2025 10:42:29 | critical | No Maintenance Broadcasts for Ranging opportunities received - T2 time-out;CM-MAC=[REMOVED] |
| 14-10-2025 10:42:04 | critical | No Ranging Response received - T3 time-out;CM-MAC=[REMOVED] |
| 14-10-2025 10:41:59 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 14-10-2025 10:41:16 | critical | No Ranging Response received - T3 time-out;CM-MAC=[REMOVED] |
| 13-10-2025 09:53:09 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 12-10-2025 01:17:37 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 10-10-2025 03:11:25 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=20:[REMOVED] |
| 08-10-2025 04:44:34 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 07-10-2025 14:52:35 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 05-10-2025 16:46:03 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 04-10-2025 13:44:00 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
| 02-10-2025 08:41:28 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=20:[REMOVED] |
| 27-09-2025 16:43:18 | critical | Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=[REMOVED] |
