Forum Discussion

phills64051's avatar
phills64051
Joining in
9 months ago
Solved

Change to Hub4 - no dial tone

Prior to installing Hub4 all my landlines worked fine. After installing Hub4, one landline phone works perfectly; the other has no dial tone, but does send and receive calls. Help!

  • David_Bn's avatar
    David_Bn
    9 months ago

    Thanks for coming back to us phills64051.

    If you were switch the handsets over does the fault follow the handset, or stay at the connection point for the handset?

    Thanks

    David_Bn

  • Hi there phills64051 👋 Welcome back to our forum and thanks for your post 😊

    Sorry to see you've been having issues with your landline service since changing to a Hub 4. Just to confirm, are you using your landline via a normal wall connection or plugged into the Hub? 

    Have you been able to check our service page here to see if this is due to any know area issue? You can also sign in with your My VM details to run a fault test with the connection.

    If that doesn't help, it would be best to check our phone support page here for further help.

    If you still have issues after completing these checks, please let us know. We'll be happy to assist further.


    Regards

    Nathan

    • phills64051's avatar
      phills64051
      Joining in

      Hi Nathan

      I've run the checks  - everything's OK - and checked the phone support page; nothing relevant there.

      Because my hub is upstairs and not next to my home phone connection point downstairs, one of your engineers converted me to internet telephony a while ago (he ran a telephone cable from the hub through the wall to the outside connection box).

      I have two home phones connected to the home phone connection point using a splitter box; one is fine, but the other has lost its dial tone. The latter still makes and received calls though.  As I mentioned, they both worked OK with Hub3.

      • Beth_G's avatar
        Beth_G
        Forum Team

        Hi phills64051

        Thank you for getting back to us. 

        Can we just confirm that the second landline in question does not have its own separate number? Are we correct in assuming that you do just have the one landline number?

        It looks as though you may have something plugged into TEL Port 2 on the Hub 4 - if so, this won't work as it's not an active port. Your landline would need to be plugged into TEL Port 1 and everything plugged in via extensions should be working as normal.  

        Have you been able to swap the handsets round to test whether the issue could be with the handset or cable/connection?

        Let us know