cancel
Showing results for 
Search instead for 
Did you mean: 

Hub power supplies

CJ38
Tuning in

My hub 3 has a separate power supply to the outside dropbox. When my friend got a new installation with a hub 5 he didn't need a separate supply. Does that mean the hub 5 supplies the dropbox via the one cable. Which begs the question if you were to upgrade to a hub 5 would there need to be some rewiring of the dropbox supply.

1 ACCEPTED SOLUTION

Accepted Solutions

Tudor
Very Insightful Person
Very Insightful Person

Neither RFoG(Radio Frequency over Glass, still DOCIS) nor coax DOCIS is better. Eventually the RFoG will be transferred over to full fibre with no DOCIS involved.


Tudor
There are 10 types of people: those who understand binary and those who don't and F people out of 10 who do not understand hexadecimal c1a2a285948293859940d9a49385a2

See where this Helpful Answer was posted

4 REPLIES 4

Tudor
Very Insightful Person
Very Insightful Person

From what you describe I think you have a RFoG fibre connection to your outside omnibox and this requires a power supply, it’s nothing to do with what hub you have. So changing hubs will make no difference. Only a small proportion of users have RFoG.


Tudor
There are 10 types of people: those who understand binary and those who don't and F people out of 10 who do not understand hexadecimal c1a2a285948293859940d9a49385a2

Thank you. Out of curiosity what would be the alternative to RFoG and which is the newer or better system

Tudor
Very Insightful Person
Very Insightful Person

Neither RFoG(Radio Frequency over Glass, still DOCIS) nor coax DOCIS is better. Eventually the RFoG will be transferred over to full fibre with no DOCIS involved.


Tudor
There are 10 types of people: those who understand binary and those who don't and F people out of 10 who do not understand hexadecimal c1a2a285948293859940d9a49385a2

Thank you