192.168.100.1 doesn't get me to my new hub 3 in modem mode.

[pot-shadley]

We have just had a new Hub 3 which I have got up and running and put into modem mode as we have our own router. Normally I would go to 192.168.100.1 for access to the hub 3 but this doesn't work.

How would I get into the hub 3 if I wanted to change it back to router mode?

[legacy1]

Maybe VM have broken the modem mode 192.168.100.1 or your new router don't like seeing a dead MAC

Get the WAN MAC from your router (not hub) put that on your PC NIC and connect in place of the router to hub then try 192.168.100.1

[Client62]

To access the Hub 3 at 192.168.100.1  your computer would need to be on the same subnet.

[Cardiffman282]

Either disable all VPN connections and try again or else pinhole reset the hub for 30 seconds to reset it to router mode. 

[Tudor]

What colour is the LED on the Hub3?

[pot-shadley]

Managed to get this working with 192.168.100.1, and the LED is red.

[Adduxi]

Sometimes this occurs to me as well.  It might connect via the phone, or via the laptop, or at times just will not connect.  I don't fret over it, as if I leave it a while it will connect.  I've no idea why this happens, and life is too short to worry about it  ....   🙂

[Tudor]

"Managed to get this working with 192.168.100.1, and the LED is red." that’s ok, it is actually magenta, but can look red to some people,