Community FAQ
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Having difficult setting up TP Router

Go to solution
coldfusion0
On our wavelength

2 weeks ago

I am having difficulties setting up TP-link router. I go into quick setup and I have selected Dynamic IP and the test fails.

  • I have tried 30 turn off.
  • Tried ports 1,3,4 same results.
  • rebooting TP-link router.
  • updating TP-link firmware.
0 Kudos
1 ACCEPTED SOLUTION

Accepted Solutions

Go to solution
carl_pearce
Community elder

2 weeks ago - last edited 2 weeks ago

You have to reboot the HUB, ensuring there are no other wired devices connected, with the exception of the TP-link Router connected to any of the ports on the HUB to the WAN port on the TP-link Router.

This ensures the HUB associates the correct MAC address to allow internet access (Only one device is allowed internet acccess assuming modem mode is being used).

See where this Helpful Answer was posted

1 REPLY 1

Go to solution
carl_pearce
Community elder

2 weeks ago - last edited 2 weeks ago

You have to reboot the HUB, ensuring there are no other wired devices connected, with the exception of the TP-link Router connected to any of the ports on the HUB to the WAN port on the TP-link Router.

This ensures the HUB associates the correct MAC address to allow internet access (Only one device is allowed internet acccess assuming modem mode is being used).

Top