Arlo door camera on Hub 5

[chappyat27]

Due to a problem on the Hub 5 using an app I've had to do a bit of resetting.
The Arlo only works on a 2.4g signal so I'm trying to switch the 5g signal off put all controls are greyed out.
Anyone help me please? 

[Client62 · Accepted solution]

Use the Hub 5 admin menu at http://192.168.0.1/
Login with the Hub Password.

Disable  "Smart Wi-Fi" aka "Wireless Channel Optimization"   ( or what ever it is called on a Hub 5 )

Now it should be possible to disable the 5GHz Wi-Fi to ensure use of just the 2.4GHz band whilst you perform the configuration of the Arlo.

[legacy1]

The hub wifi is only for PC and phones that what VM test for better support use hub in modem mode and get a better router with 1Gb ports

[chappyat27]

Apologies.
I needed to tick the disable button then leave that page, then go back into it.
Thank you 

[Client62]

What you are seeing is how slow the VM Hub is at processing the settings change when you click on Apply Changes. Our VM Hub is the same, some Wi-Fi changes taking 60+ seconds to complete.