WiFi connected no internet

Having the Hub Wi-Fi set to Auto channel selection caused random dropouts for us.

Try with the 2.4Ghz Channel set to 1 or 6 or 11, and with the 5 GHz Channel set to 36 or 44.

I can't even access the hub now to change the channels

Starting to think that something is wrong with the hub itself

Try the Hub again it is at : http://192.168.0.1/  

I included a link as in the earlier screen shot the address for the Hub had a typo in it.

Use a web browser without a VPN / Adblocker / Apple Relay or Private Browsing

I just clicked on the link and below is what I see from my HP PC ...

Thanks for your help with this!

I've deactivated all my extensions and tried a different browser and tried accessing it from my phone and the page just won't load. 

Try the same in a laptop browser or a games console browser.  Again with all VPNs et al turned OFF.

Can you Ping 192.168.0.1     ?    if not you still have some kind of VPN / Proxy / Relay in operation.

Finally managed to get in and change the channels. The same issue persists 😞

Wi-Fi is a two way process, looking at the mobile / laptop we only see the signal strength from the Hub.

In the Hub 3 menu home page there is an option Network diagnostic tool, if you run this does is report a poor signal from the devices that are having issues i.e. is a Wi-Fi Mesh or some Access Points required to cover your home.

For us a Hub 3 in Router mode + 2 Wi-Fi Access Points are required to cover the both levels and a dozen rooms.

Ah ok. So it lists a lot of devices that it says has low signal strength and they should be moved closer to the hub. I already have a mesh extender and these devices have been working fine until recently 😞

Hi, the Xbox and one fire stick seems to be more stable having implemented some of the ideas above. The internet still seems very patchy though saying 'connected no internet' despite other things being connected in the same room