Forum Discussion

Trypta's avatar
Trypta
On our wavelength
11 months ago

Superhub 5 error

Hi, my network seems to be somewhat unreliable.

I'm noticing a lot of errors on the modem log too. I've got a gig1 connection on a superhub 5 in modem mode, which is attached to a wavlink quantum dax router.

My logs are as follows:

Downlink-

Spoiler

3.0 Downstream channels

Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
13630000000.341QAM 25629
21390000002.541QAM 2561
31870000001.741QAM 2567
41950000001.741QAM 2568
52030000001.341QAM 2569
62110000001.341QAM 25610
72190000001.241QAM 25611
82270000001.141QAM 25612
92350000001.141QAM 25613
102430000000.841QAM 25614
112510000000.741QAM 25615
122590000000.641QAM 25616
132670000000.741QAM 25617
142750000000.441QAM 25618
152830000000.441QAM 25619
162910000000.441QAM 25620
172990000000.341QAM 25621
183070000000.441QAM 25622
193150000000.441QAM 25623
203230000000.341QAM 25624
213310000000.341QAM 25625
223390000000.441QAM 25626
233470000000.441QAM 25627
243550000000.241QAM 25628
253710000000.341QAM 25630
263790000000.341QAM 25631
273870000000.341QAM 25632
283950000000.242QAM 25633
294030000000.242QAM 25634
30411000000042QAM 25635
314190000000.142QAM 25636

3.0 Downstream channels

Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors
1Locked41120
2Locked41100
3Locked4170
4Locked41140
5Locked4170
6Locked4150
7Locked4150
8Locked4180
9Locked41100
10Locked4170
11Locked41120
12Locked41100
13Locked4190
14Locked41130
15Locked41220
16Locked4170
17Locked41160
18Locked4180
19Locked41100
20Locked41130
21Locked41120
22Locked41170
23Locked41150
24Locked41160
25Locked41130
26Locked41150
27Locked41360
28Locked42450
29Locked42460
30Locked42440
31Locked42390

3.1 Downstream channels

Channel Channel Width (MHz) FFT Type Number of Active Subcarriers Modulation (Active Profile) First Active Subcarrier (Hz)
37944K1840QAM 40961108

3.1 Downstream channels

Channel ID Locked Status RxMER Data (dB) PLC Power (dBmV) Corrected errors (Active Profile) Uncorrectable errors (Active Profile)
37Locked41-3.53617969526252

Uplink-

Spoiler

3.0 Upstream channels

Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
04960000047.85120QAM 645
14310000047.55120QAM 646
23660000047.35120QAM 647
33010000046.85120QAM 648
42360000046.55120QAM 6411

3.0 Upstream channels

Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
0ATDMA0000
1ATDMA0010
2ATDMA0000
3ATDMA0000
4ATDMA0000

3.1 Upstream channels

Channel Channel Width (MHz) Power (dBmV) FFT Type Modulation
1210.443.22KQAM 256

3.1 Upstream channels

Channel Channel Type Number of Active Subcarriers First Active Subcarrier (Hz) T3 Timeouts T4 Timeouts
12OFDMA2087400000040

Can someone let me know if these look normal please?

 

 

3 Replies

Sort By
  • Trypta's avatar
    Trypta
    On our wavelength
    11 months ago

    I've just spoken to customer support and they've told me not to use the 2.5gbps ethernet port???
    Am I not more likely to saturate the lower speed ports if all my network activity is going through the lower speed ports?

  • carl_pearce's avatar
    carl_pearce
    Superstar
    11 months ago

    Corrected errors are normal, even a large amount, on the DOCSIS 3.1 channel.

    A couple of timeouts, but nothing to be concerned about, although the power level on the DOCSIS 3.1 channel is just on the edge of being out of spec. DOCSIS 3.0 upstream power levels a touch high, but in spec.

    I've had no issues with the 2.5Gbps ethernet port in modem mode.

    What issues do you have?