Forum Discussion

Bilco62's avatar
Bilco62
Tuning in
11 months ago
Solved

v6 box hung on starting up message - flashing light

My v6 box has hung on the "Starting Up" message. The light on the on button is also flashing. I've tried rebooting a number of times, etc. Its been taking longer and longer to start up for some time now, however we also had a power cut on Friday so I'm wondering if that made things worse?

Can this be looked at please?

  • Any TV box that won't bootup has a fault, and should be reported - with a view to a tech visit.

    As a last throw of the dice, try the following.. Try turning off the V6 at switch; then on the V6 box hold down both the power button and the +button at the same time. Then turn on the V6 again whilst keeping hold of those buttons for a further 30 seconds. The box should reboot, the power button should turn blue, and it should reset and boot up normally.

3 Replies

  • japitts's avatar
    japitts
    Very Insightful Person

    Any TV box that won't bootup has a fault, and should be reported - with a view to a tech visit.

    As a last throw of the dice, try the following.. Try turning off the V6 at switch; then on the V6 box hold down both the power button and the +button at the same time. Then turn on the V6 again whilst keeping hold of those buttons for a further 30 seconds. The box should reboot, the power button should turn blue, and it should reset and boot up normally.

    • Bilco62's avatar
      Bilco62
      Tuning in

      Thanks - I sort of thought this would have to happen. However, I can't seem to get through the diagnostics screens, so I was hoping a moderator could pick it up at some point.

      • John_GS's avatar
        John_GS
        Icon for Forum Team rankForum Team

        Hi Bilco62 

        Thanks for posting and welcome back to the community.

        Sorry to hear of the V6 box issue. Can see from a system check you've got this sorted via an engineer visit.

        Let us know if you need further assistance.