Forum Discussion

tjfs's avatar
tjfs
Tuning in
2 years ago

V6 upgrade to 360 no video (solved)

I started a V6 upgrade to 360 an hour and a half ago. All seemed to be proceeding normally, however I still have no video output to my TV. The white light is on as usual on the V6 box. 

The problem turns out to be my HDMI switch box which can pass through the signal from the V6 box but not the signal from the 360 box.

There is a setting under audio & video to select 1080i output. With Auto or 1080p the signal is not passed through my switch box (even though the box is labelled 1080p).

2 Replies

Sort By
  • Alex_RM's avatar
    Alex_RM
    Icon for Forum Team rankForum Team
    2 years ago

    Hi tjfs,

    Thanks for posting and sorry to hear you had some issues with the changeover.

    Just to confirm, is everything now resolved?

    Alex_Rm

    • tjfs's avatar
      tjfs
      Tuning in
      2 years ago

      Yes, but I'm very surprised this doesn't appear to be documented anywhere as it gave the impression that my TV box was dead after the upgrade.

      Tim