Forum Discussion
- Client62Alessandro Volta
Change the IP address of what device ?
The VM Hub uses one network socket only in Modem mode - i.e. no Wi-Fi. A Wi-Fi Router or similar is required for use with a VM Hub in Modem mode.
If you have enabled Modem mode over Wi-Fi and now lost contact with the VM Hub,
the VM Hub can be restored to Router mode by :
Pressing RESET for 60 seconds, then leave the VM Hub powered on to revert to the factory settings and the original Hub & WI-Fi passwords.- legacy1Alessandro Volta
Client62 wrote:A Wi-Fi Router or similar is required for use with a VM Hub in Modem mode.
Its not required but mostly what many do😁
if you have your own router that can change the WAN MAC which you should really only do with a MAC you own from another device then you can change it power off hub for 2mins then back on.
Related Content
- 25 days ago
- 2 months ago
- 10 months ago
- 3 months ago