Major Connection Issues Hub 5x
My VM connection completely dropped off on Monday 24th around 5pm. It was very intermittent since, coming on and off, tried shutting the hub down and restarting. I'm on a Hub 5x the XGSPON line. Resetting to factory settings (which would temporarily restore service at a decent speed only to drop to being poor soon after). Initially in my VM app it showed they could see a fault in the area and that we could book an engineer. Later on this disappeared, saying no faults in the area. We tried calling VM, which was futile as they constantly drop the call after a robot message. I left it overnight, to Tuesday 25th. The connection is intermittent, or running very slow anyway. Plugging anything into the ethernet port, my houses switch, doesn't work, none of the device wired throughout the house work. I tried through a unfi UCG gateway, which shows 100% packet loss. But connecting to the VM hubs wifi, gives an intermittent though poor speed connection. I contacted VM in the evening and get through to someone, who runs me through the usual tests, and says they can't see an issue on the line after checking with level 2 support, annoyingly, running samknows, it was apparently showing full speed to the hub and to my mobile....yet it was struggling to load a basic Google search. But now day 3, 26th, same problem. Still a poor connection, nothing connected to the hub via wire works, e.g. my network switch and any devices wired to it dont seem to work when i try via cable, trying the UCG gateway sends signal to a wireless AP, which sometimes connects and sometimes doesn't, or connects without Internet or very poor speeds. I'm not sure what the issue, and VM seem useless. Another guy on the phone prior had said it would resolve by yesterday evening as they were aware of issues, which was clearly not true just to get us off the phone. The guy I had spoke to from the technical team said I was the first person he'd spoke to on the day about having intermittent or poor connection issues. Advice on what it could be, whether hub, connection or what else to get would be appreciated. Observations Hub light has stayed white, not changed to anything else. Even when reset, it stayed white. Hub also is in normal router mode, no changes there. Can only get some level of service when connected to VM hub wifi, though poor speeds Ethernet Wired devices, like connecting a switch to it, does not work, and also seems to cause connection issues for the devices connected to the hub on wifi Unifi Gateway when connected, shows 100% packet loss from the Hub, SamKnows tests apparently show normal speeds to the hub and to my mobile, but it cant load a google page sometimes.... Other wired devices I have tried, at times give an error "Error obtaining IP" or something similar Resetting the hub to factory settings, briefly kicks things to working sometimes, not everything, and then quickly diminishes to poor service again. Even when connected to the VM hub now, as long as the connection is stable, it shows I am getting half my usual speed on tests, but is behaving way slower, e.g. could be showing 60-70mbps, bit still struggling to buffer 1080p youtube videos at times etc. Things tried: Restarting Hub Resetting to factory settings Plugging devices on the ethernet ports, the ports work, but devices like those through a switch get no internet, or give "connected without internet" error. Called VM, they had me do all the same, also reset things from their end. I hear the Hub 5 had some sort of issues with DHCP, or devices being assigned IPs, could this be something similar? Thank you.112Views0likes2Comments"DHCP RENEW WARNING" - Internet disconnecting for 5-10 seconds every 10-15 mins
Within the past 4-5 weeks my internet has started to drop when gaming in particular and it has become unbarable to use. Here is the key information. Connection drops for 5-10 seconds perhaps 5-10x per hour (Getting worse over time) Using a HomeHub3 in modem mode Connected into the HomeHub 3 is "Google Wifi - Mesh Wifi System" No reported outages Virgin HomeHub scan is reporting no issues. Google Mesh is reporting great connectivity Computer is connected via Ethernat not wifi Each mesh is connected to each other via ethernet not wifi. Network Log 21/03/2024 18:13:19 notice LAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 21/03/2024 09:21:42 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 20/03/2024 22:16:54 notice LAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 19/03/2024 12:15:29 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 18/03/2024 18:03:49 notice LAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 17/03/2024 15:27:33 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 15/03/2024 04:09:44 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 14/03/2024 22:07:10 Warning! RCS Partial Service;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 12/03/2024 03:21:18 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 01/01/1970 00:01:44 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 07/03/2024 15:58:17 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 06/03/2024 02:04:21 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 04/03/2024 03:58:17 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 02/03/2024 08:33:46 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 29/02/2024 15:58:17 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 29/02/2024 06:19:42 notice LAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 27/02/2024 07:43:8 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 26/02/2024 08:52:35 Error DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 25/02/2024 20:22:14 critical No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; 24/02/2024 15:03:35 notice LAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;5.1KViews0likes12CommentsHUB 5x - GSX-PON FTTP - Extermely spikey latency
Hi All, So I've been on the new GSX-PON FTTP (Fibre to the Premises) connection since October. The first month and a bit was fine with no issues however since at least November I have had issues with latency spikes noticeable when gaming. I set up a Broadband Quality monitor and have also been running various latency tests and it seems that my broadband consistently had a pattern of peaking to very high latency and also when in use and gaming more of these latency spikes occur. I'm not talking spikes to like 60ms, I am seeing spikes up to well over 500ms. On the tests I run the latency on download is fine however on upload most of the time it will see an average of around 150-350ms latency. On the rare occasions, I do see this stay around 20-40ms on tests but I'd say 90% of my tests show over 200ms on upload latency. This seems to be down to bufferbloat however there is nothing I can try on my side to sort this out as the Hub 5x cannot yet be put into Modem mode so I can not buy and use my own router with some SQM to help stop bufferbloat. However, that is beyond the point as my old ADSL line never had these issues and there was no special SQM on that. I should not need to buy a router when this is not acceptable broadband that should not be having these issues. I've had an engineer out who replaced the Hub 5x and also cleaned my fiber cables inside and the one outside connecting into my house. The one on the pole has not been done yet although I am told by the engineer that a request for a new line to be sent from the pole to my house has been sent, this has only been up since October so I don't think this will solve the issue but we will see. Is there anyone else on the new GSX-PON network using a Hub 5x who can share their results on BQM and other tests so I can compare? I feel like Virgin Media's new network has an issue with the upload latency and I can see this being annoying for them to try and fix which they really need to do. Also for your info, I get the exact same results with the Wi-Fi turned off on the Hub and all my network devices disconnected from the hub. I still get the fluctuating results with 1 Laptop connected directly into the Hub with nothing else connected to the network at all. I've included examples below with also the rare good test I actually got to prove that it isnt just the test bloating the network as sometimes it has perfect upload latency but only 5% of the time I test it. If that. Broadband Quality Monitor Bufferbloat Test Cloudflare Test 1 Cloudflare Test 2 *This is what I get the majority of the time*4.5KViews0likes30Comments