paul0363
Rising star
Joined 8 years ago
User Profile
User Widgets
Contributions
Re: 360 app issues AGAIN!
Had the same problem which appeared after the firmware was updated to 5.16. What appears to have fixed it so far was to factory reset the box from the settings menu (Settings>System>Factory Reset). By doing a factory reset you won't lose any recordings or settings (favourite channels etc.) but you will need to sign back into most apps. Worth a try!61Views0likes0CommentsRe: Routing problems to IP Range
Here's another one for you: Tracing route to 45.158.56.2 over a maximum of 30 hops 1 2 ms 2 ms 3 ms Merlin [192.168.72.1] 2 15 ms 17 ms 10 ms 10.53.38.245 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete.3Views0likes0CommentsRe: Issues with Hub 5x in modem mode
Could it be the Hub 5x is implementing DNS rebind protection (i.e. won't return any result in the private IP address ranges 172.16.0.0/12, 10.0.0.0/8 and 192.168.0.0/16). Other topics in these forums and on Reddit would suggest this may be the case. The hub rebooting etc. unless you turn it upside down would suggest a loose connection somewhere (possibly inside the hub itself). Check all your connections - make sure all the mains wires/power connectors are pushed home and try a socket strip instead of a socket adapter. If it's still failing then I'd be asking VM for a replacement.368Views0likes0CommentsPixellation on STV (Central East Region)
What channel are you getting pixellation on? We're getting pixellation ONLY on STV (Central East Region) which only started today. Checked with the neighbours and theirs is the same. Looks like a fault with the feed or somewhere in the VM network.947Views0likes4CommentsRe: Virgin router or Google WiFi?
Saintade wrote: Is there a way to see what speeds I'm getting in the summerhouse? Either connect a laptop to one of the ethernet ports on the back of the TPLink with an ethernet cable and download the Ookla app from the Microsoft store (or go to speedtest.net to run in a browser) and run a speed test. You can do this wirelessly from your laptop too. Or you could download the Ookla app to your phone and run a speed test from there. Remember that the wired speed will be more accurate (assuming that your PC/laptop has a Gigabit ethernet port).851Views0likes0CommentsRe: Virgin router or Google WiFi?
Yes, but your summerhouse router needs to be in Wireless Access Point mode (so make sure whatever you buy supports AP mode!) Bridge mode is essentially what modem mode is on your VM hub: https://www.howtogeek.com/867942/what-is-router-bridge-mode/ https://community.fs.com/article/understanding-the-differences-ap-mode-vs-router-mode.html Something like this may do what you're after.1KViews0likes2Comments