Just upgraded from M500 to 1gb new Hub 5

[alexw1983]

Hi All,

Just upgraded from 500Mpbs to 1gb and received my new Hub 5! But can only get around 400Mbps according to speedtest.net, wired cat6. Upload is 100Mbps which is fine.

3.0 Downstream channels

Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID

1	330000000	-2.1	40	QAM 256	25
2	138000000	2.5	42	QAM 256	1
3	146000000	2.3	42	QAM 256	2
4	154000000	2	42	QAM 256	3
5	162000000	1.5	42	QAM 256	4
6	170000000	1	42	QAM 256	5
7	178000000	0.5	42	QAM 256	6
8	186000000	0.2	41	QAM 256	7
9	194000000	0.2	41	QAM 256	8
10	202000000	0.2	41	QAM 256	9
11	210000000	0.3	41	QAM 256	10
12	218000000	0.2	41	QAM 256	11
13	226000000	0.1	41	QAM 256	12
14	234000000	0.1	41	QAM 256	13
15	242000000	0.2	41	QAM 256	14
16	250000000	0.3	41	QAM 256	15
17	258000000	0.3	41	QAM 256	16
18	266000000	0.3	41	QAM 256	17
19	290000000	0.7	41	QAM 256	20
20	298000000	0.9	41	QAM 256	21
21	322000000	-1.8	40	QAM 256	24
22	338000000	-2.2	40	QAM 256	26
23	346000000	-2.5	40	QAM 256	27
24	354000000	-2.9	39	QAM 256	28
25	362000000	-2.9	39	QAM 256	29
26	370000000	-3	39	QAM 256	30
27	378000000	-3.1	39	QAM 256	31
28	386000000	-3.3	39	QAM 256	32
29	394000000	-3.6	39	QAM 256	33
30	418000000	-3.8	39	QAM 256	36
31	426000000	-3.6	39	QAM 256	37
32	450000000	-3.1	39	QAM 256	40

3.0 Downstream channels

Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors

1	Locked	40	0	0
2	Locked	42	0	0
3	Locked	42	0	0
4	Locked	42	0	0
5	Locked	42	0	0
6	Locked	42	0	0
7	Locked	42	0	0
8	Locked	41	0	0
9	Locked	41	0	0
10	Locked	41	0	0
11	Locked	41	0	0
12	Locked	41	0	0
13	Locked	41	0	0
14	Locked	41	0	0
15	Locked	41	0	0
16	Locked	41	0	0
17	Locked	41	0	0
18	Locked	41	0	0
19	Locked	41	0	0
20	Locked	41	0	0
21	Locked	40	0	0
22	Locked	40	0	0
23	Locked	40	0	0
24	Locked	39	0	0
25	Locked	39	0	0
26	Locked	39	0	0
27	Locked	39	0	0
28	Locked	39	0	0
29	Locked	39	0	0
30	Locked	39	0	0
31	Locked	39	0	0
32	Locked	39	0	0

3.1 Downstream channels

Channel Channel Width (MHz) FFT Type Number of Active Subcarriers Modulation (Active Profile) First Active Subcarrier (Hz)

159

94

4K

1840

QAM 4096

1108

3.1 Downstream channels

Channel ID Locked Status RxMER Data (dB) PLC Power (dBmV) Corrected errors (Active Profile) Uncorrectable errors (Active Profile)

159

Locked

40

-4.7

553272199

532

3.0 Upstream channels

Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID

0	49600000	49	5120	QAM 64	1
1	43100000	48.5	5120	QAM 64	2
2	36600000	48.3	5120	QAM 64	3
3	30100000	47.8	5120	QAM 64	4
4	23600000	47.3	5120	QAM 64	5

3.0 Upstream channels

Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts

0	ATDMA	0	0	0	0
1	ATDMA	0	0	0	0
2	ATDMA	0	0	0	0
3	ATDMA	0	0	5	0
4	ATDMA	0	0	0	0

3.1 Upstream channels

Channel Channel Width (MHz) Power (dBmV) FFT Type Modulation

6

10

42.5

2K

QAM 256

3.1 Upstream channels

Channel Channel Type Number of Active Subcarriers First Active Subcarrier (Hz) T3 Timeouts T4 Timeouts

6

OFDMA

200

74000000

0

0

General Configuration

Network accessMaximum Number of CPEsBaseline PrivacyDOCSIS ModeConfig file

Allowed

1

Enabled

3.1

xv9873254k;fg87dsfd;kfoA,

Primary Downstream Service Flow

SFIDMax Traffic RateMax Traffic BurstMin Traffic Rate

10622

1200000450 bps

42600bytes

0 bps

Primary Upstream Service Flow

SFIDMax Traffic RateMax Traffic BurstMin Traffic RateMax Concatenated BurstScheduling Type

10581

110000274 bps

42600bytes

0 bps

42600bytes

Best Effort

I'm in modem mode as my router is a Asus RT-AC88U and WAN is connected to port 1 (1Gbps port).

Can you see anything wrong with my levels?

Thanks,

Alex

[alexw1983]

Looks like it's sorted. 🙂 

Installed new Cat 6 cables between Hub and a router, now getting 946Mbs.
https://www.nperf.com/en/r/3529121919910423-g0qMUPcc