cancel
Showing results for 
Search instead for 
Did you mean: 

Having to restart my Router almost daily

MrBasher
Joining in

Hi Guys,

Recently I have had to restart my router (normally in the morning when I start my PC) to get my speed back/  When I use fast.com it shows me as having roughly 60MB when it is 1Gig, after a router reboot It is back to what it should be.

I am also getting Ethernet and Wi-Fi errors when I run the Network Diagnostic Tools from the router but both Ethernet and Wi-Fi seem to be functioning OK (After the morning resrt)

Please advise....

Regards,
MrBasher

4 REPLIES 4

Cardiffman282
Super solver

Try a 60 second pinhole reset of the hub with no ethernet connection. 

---------------
Cancel VM here
Complain to VM
here
Demand compensation from VM here
Demand your call recordings here
Monitor the state of your VM connection here

OK will do. I tried a router reset from the home page with Ethernet.  At what point do I connect my cable?

The pinhole reset needs to be done physically via the hub pinhole reset button with a pen or similar. Remove the ethernet cable before you do it and reattach ten minutes after or so. 

---------------
Cancel VM here
Complain to VM
here
Demand compensation from VM here
Demand your call recordings here
Monitor the state of your VM connection here

legacy1
Alessandro Volta

reset will not fix this

---------------------------------------------------------------