Forum Discussion

ScatchyMonkey's avatar
ScatchyMonkey
Tuning in
2 years ago
Solved

Hub 4 - slowly pulsing white light / loss of broadband

Area 30/DL14. Happened a few times now, with the same outcome. Speed and reliability fine, then: The telltale sign of WiFi disconnecting from the internet on a device I happen to be using Hub 4's ...
  • ScatchyMonkey's avatar
    ScatchyMonkey
    2 years ago

    Hey - my original problem was due to a kinked white coax cable. Was patiently diagnosed by an engineer on site with his meter. Replaced the cable and all was well again. Hope that helps.

Stignasty2's avatar
Stignasty2
On our wavelength
2 years ago

I have a similar problem. White pulsing led on hub 4 started last night. Cant log in to the hub 192.168.0.1 times out. Service and speed seems fine? What is going on?

ScatchyMonkey's avatar
ScatchyMonkey
Tuning in
2 years ago

Hey - my original problem was due to a kinked white coax cable. Was patiently diagnosed by an engineer on site with his meter. Replaced the cable and all was well again. Hope that helps.

  • Stignasty2's avatar
    Stignasty2
    On our wavelength
    2 years ago

    Thanks for answering. Since I posted my question yesterday, the VM status page shows a TV fault on their network being investigated. Spookily similar to your issue except I didnt have service loss (touching wood). The status page now says the TV fault will be repaired in 4 days! Lucky i dont watch TV.