100% packet loss on my BQM almost every day
My BQM is showing 100% packet loss (full block of red bar) almost every day, I usually reset the router by turning it on and off again and it starts reading data again. Today however I had to do it t...
Forum Discussion
Sorry I meant not in modem mode, I don't use a 3rd part router just the Hub3.
Also I have looked in the firewall settings or security settings of the Hub 3 for that Respond to ICMP Ping option, but I can't see one in there.
Hey there Daniel.
For me, on my ancient/antiquated Hub 2, the key setting was at the following location:
Open Hub administration page at http://192.168.0.1 > Login fully to the Hub using password > Advanced Settings > scroll down to "Tools" > select "Ping" > tick the box for "Respond to ICMP echo requests sent to WAN IP"
It might still be the same for the Hub 3 (or thereabouts)!
Hope that helps! 🙂