Forum Discussion

Jamesp1989's avatar
Jamesp1989
Joining in
9 months ago

Ports will not open via UPNP or otherwise

We have a hub 3.0 that will not open ports no matter what I do. I have turned on upnp which does nothing. I have turned on both port triggering and port forwarding for port 8080 and I have set the device to have a fixed address via DHCP.

There must be some solution to this other than moving to modem mode and using it as a bridge? 

I'm using just my phone and port checking websites to verify the port is open so windows firewall won't be a factor. 

  • legacy1's avatar
    legacy1
    Alessandro Volta

    It was aways going to be the case this would happen and blame router mode when modem mode it just works or your the problem.

    • Akua_A's avatar
      Akua_A
      Forum Team

      Hi Palm771 

      Welcome back to our community forums and sorry to hear you are having similar issues with hub ports. We can understand your frustration. We have had a look into this and it seems you have recently contacted our team regarding this issue and a resolution has been made. Do you need any further help with this?

      Thanks,