Network card won't reconnect after update
Last night at around 12:55 hub5 rebooted it did a software update and since that update my akasa 2.5gb network card will not reconnect.
I have tried everything bar a pinhole reset but all I keep ge...
Forum Discussion
When 1 computer does not work and all else does, it is the 1 computer that needs a Restart to force a cold boot causing a fresh DHCP request. Be aware a pin hole reset of any VM Hub risks it reverting to the original firmware.
@ Client62
I know how it works hence me rebooting system right away but that did not work.
No matter how many times I rebooted the PC or hub it wouldn't acquire a new IP like I have shown in the screenshots above. I tried many things but none worked, manually inputting the details was the only way.
The Ethernet port on the motherboard was fine that would connect no problem, it was the akasa 2.5gb network card that's the issue. I will remove all the details I put in manually and see if it acquires the details by itself if not there is a problem with the card hence it blue screening my PC after I entered the details.
