Remote pairing

Hi Aragwen​

Have you tried inserting new batterries?

Do any of the following Hisense codes work?  0009 0025 0209 0326 0753.

Don't just select the first one that appears to work, try a few as some are only partially paired as you've found.

If they don't work try the instructions from the following pages:-

/how-to/guides/tv/pairing-the-remote/v6/start

Have you tries searching for a TV remote control code using 999? 

Press and hold down clear and TV at the same time until the light on the top of the remote flashes green twice.  Then enter the code 0999 to access the TV code database – the LED will flash green twice. 

Press channel up until a code turns off the TV – the LED will flash green each time a code is sent.  Once the TV turns off, release channel up and press standby on the remote to turn the TV back on. 

Press vol +/- and mute to check that the remote is working with your TV. If they don’t, continue to search using channel up until the next code turns off the TV, and repeat steps 4 and 5. When the Volume and Mute keys work, press OK to store the code. The LED will then flash green twice. 

(If you reach the end of the code database, the light on top of the remote will give an extended red flash and exit programming mode)

LIke the codes I gave above I gave for you to try for the Hisense, don't just select the first one that appears to work, try a few as some are only partially paired as you've found.