Forum Discussion

Karasouthall's avatar
Karasouthall
Joining in
12 months ago

360 box cs2004

Recently upgraded so we can have a box upstairs set it all up today and it give the code CS2004 no channels work rang virgin he said he has sent bits across and i have to wait 24 hours we had virgin upstairs a few yrs a go so cable was already there but noticed new cable in box not screwed like old cable anyway tried with old and new cable and still code is on

4 Replies

  • I believe some of the newer cables just have a push fit over the screw connectors, CS2004 usually is the white coax cable connection to the box if that has been checked and connected and the new box activated can you access the TV guide and do the apps work assuming you set up the network connection.

     

    • Karasouthall's avatar
      Karasouthall
      Joining in

      Hi yes have pushed cables in so all connected up box connected to the hub fine got a txt to say box has been acrivated but no live channels can be accessed and the code still comes up as check this morning can watch on demand etc just not live tv

      • roy247's avatar
        roy247
        Hero

        If you have 2 boxes you could swap them around to see if it's the box or the location, if it's the location upstairs you might need to call Virgin and ask for a manned installation which should be included in your upgrade.

        Trying the new box where your existing box is will prove that box is working.