super hub broken ethernet ports
I need a new super hub 4 sent to me 3 ethernet ports are not working as it should be, i used the ethernet cable with sam knows on each ethernet port, 2 had almost no speed and the other didn't work a...
Forum Discussion
Is the Hub in normal router mode - or in "modem mode" perhaps? Is the wifi working ok?
Try a reset first ,,,, With the Hub still "switched on" throughout, press the reset pin in firmly with paper clip/SIM tray tool or similar "thin thing" and hold it firmly for at least 60 (a timed sixty) seconds, release the pin, leave for 5’ to stabilise - dont manually switch it off at any time. Passwords and SSID’s will reset to those on the sticker so log in and change them back to what they were/want them to be.