Half speed hero
Hello I've been running into a strange issue that I just can't seem to figure out, so I thought I’d share it here to see if anyone has come across something similar or has any advice. I’d really appreciate any help or insights! Networking Kit: VM Home Hub 4 in Modem Mode. Asus RT-AX92U is Primary connected to the VM Hub via Cat6 (provided by VM), from Port 1 on the hub to the WAN port on the router. Asus RT-AX92U Secondary is connected to the primary router via a mesh network setup. Networking Setup and Issue: I’m experiencing significant speed loss between my Virgin Media Hub and my router. Here’s what I’ve tested so far: When I plug a wired connection directly into Port 1 on the VM Hub, I get speeds over 1 Gbps, so the external connection appears solid. When I run a speed test through the router, even using a wired connection, I only see about half that speed. Wi-Fi performance is also capped (as expected to some degree), but still lower than it should be. What I’ve tried: Swapping Ethernet cables (Cat6). Changing ports on both the VM Hub and the router. Rebooting all devices. Despite all of this, I consistently lose around 50 percent of my available speed between the VM Hub and the router. Any ideas on what could be causing the bottleneck? This isn’t a new issue. It’s been happening for a while now, and I’m honestly just fed up with it.