ContributionsMost RecentMost LikesSolutionsRe: How do I request an upgrade from hub 3 to hub 5 as advised Hi Rebecca. If possible get your hands on a router from ebay and set it up as an access point. it really is easy to do and you will be shocked at just how bad the hub3 really is. I have a knighthawk router as my access point and now have a perfect signal in every room. Also if you can, get as much of your equipment off wifi and use ethernet cables(if you can hide them). My system has tv/v6 on a switch with cat7 cable. My tv upstairs is cat6 cable to the knighthawk access point. Hardest part of all this was running a cat7 cable from front room up the outside of my house through the loft and into my bedroom to the knighthawk. good luck. Re: Another solid red light post. Hub3 how many of us now have this issue and rely on the forum team for help. I too have had this same issue with the same results when you talk to the support team on the phone. I am now asking for help from the forum team. Re: Seeking Advice on Wifi Range Issue with Virgin Media Hub I have the hub 3 and its ok until you try to use everything on wifi then it struggles. If your to close to the tv could cause an issue but this could be an help use cat7 Ethernet cable to TV and any tv boxes near the router. try were possible to cable things up.... my hub3 has worked great since I cabled a few things up 🙂 Re: My LG TV doesn't detect Virgin HDMI signal after waking up from standby try hdmi 2 as this has the ARC/E, my connection works great in HDMI 2 and Not very well in HDMI 1. Magic remote works tv and the box. Re: M63 code M63 error after box needed software upgrade, would it help to do a hard restart? Re: Audio Sync problem with new 360 box Well had a fiddle about with the audio delay settings and 40ms seems to have fixed it for now. Used BBC News, Channel 601 then went through the top five channels BBC1, ITV, BBC2, CH4, and CH5. All seems fine for now, will see what happens after a reboot just to see if that upsets it. Happy Days Phil.