Forum Discussion
For comparison, I have a Hub 5 in modem mode and seeing no issues with XBox X, or any other IT devices. I'm guessing everyone has done a full factory reset of the Hub as below? Also with the Hub 5, don't change the SSID, it seems to cause issues. I believe a firmware update is in the works for the Hub 5, but I've no idea what it fixes ...
Try a 60 second factory pinhole reset as below;
Remove any ethernet cables from the Hub and hold the pinhole reset switch for 60 seconds. Do NOT reboot the Hub, just let it do it's thing. Note you will need the passwords from the bottom of the Hub afterwards, so make sure they are legible. NOTE this will remove any custom settings you may have set in the Hub, and they will all have to be setup again.
- strangwooduk2 years agoJoining in
Yeah tried all of that
The update is meant to fix the DHCP issue on the hub 5
It's still working now although dropping off a few times for a minute or 2
Related Content
- 4 months ago
- 9 months ago
- 10 months ago