They do. I have my SH5 in modem connected to my Unifi Dream Machine Pro router using the 2.5Gb ports
So...
This is where I got the information from....
on 16-05-2022 16:10
Hi @kannanni - thanks for getting in touch. I hope you're enjoying the Hub 5 and all of the benefits and features it has to offer!
When in Modem Mode, only one port on your Hub 5 will work - this will be Port 1. Once you have connected this up to your equipment, you'll just need to give your Hub 5 a quick reboot and it will then be configured on our end. You'll then need to configure your equipment as per the manufacturer's guide.Reece - Forum Team
Iv not looked at the numbers but the 2.5gb port 100% works.
They might have meant one port, rather than port 1?
Or more likely they simply mistaken. As if that was the case there really would be zero advantage especially as 1gbps tops out around 930mbps on gigabit eth
"When in Modem Mode, only one port on your Hub 5 will work - this will be Port 1."
TOTALLY WRONG, yes only one port will work, but you can use any port. You should use port 4 which is the 2.5G port, works perfectly on my Hub5 connected to my Ubiquiti Dream Machine Pro router with an SPF+ port with a RJ45 module.
+1 for above. I was using the 2.5 in Modem mode when I had the Hub 5. 🙏
