ContributionsMost RecentMost LikesSolutionsRe: IPv6 support on Virgin media jamesmacwhite wrote: Don't mind us, we are just tapping into the unofficial IPv6 support on the network. Although an official update on when we might see IPv6 officially deployed would be nice if you have the time! Or at least trying in my case! 🙈 Still can't get replies to any form of traffic on IPv6 on either of the subnets, annoyingly. Noooo clue what's going wrong. Any chance you could send me your IPv6 routing table so I can compare? 😂 Re: IPv6 support on Virgin mediaUsing IPv6 in Bridged mode allows me to see the RAs, but when assigning myself an IPv6 address within the subnet given by the RA packets (2a02:88fd:7:7::/64) results in no connection to any IP address I've tried. I get the RA packets via tcpdump fine, and have set ra_accept to 2, but, for some reason, packets don't get routed whatsoever. I plan to stick my laptop directly on the WAN later to try and see if that will work. Any tips in the meantime? This is my routing table: https://u.davwheat.dev/vmipv6_routing1.txt And my TCP dump: https://u.davwheat.dev/vmipv6_tcpdump_ra1.pngRe: IPv6 support on Virgin media I just joined Virgin today (got it all installed) and received a Hub 3, and now I'm seeing that there's a Hub 4! That's upsetting... I was surprised when I was testing out the new 500 Mbps and saw it was only IPv4. It was amusing to see 0/10 on test-ipv6.com