on 26-01-2023 09:57
Just wondering if anyone has any recommendations for a good router (running the hub in modem mode) that has built in VPN. This is to setup a lan to lan vpn with my Draytek 2865. I could get another Draytek 2865, but they won't need to load balance 2 Wans like I do.
27-01-2023 11:46 - edited 27-01-2023 11:46
A zyxel
https://www.zyxel.com/uk/en-gb/products/next-gen-firewall
https://www.zyxel.com/uk/en-gb/products/vpn-firewall
suggest VPN100 or FLEX/ATP200 or above
on 27-01-2023 21:56
Or build a PfSense Firewall-Router, which is free & open source. All you need is a basic PC (ideally with Intel I5 or better & 2GB or 4GB ram).
I run PfSense behind both my VM at BT modems, with PF load balancing the connections. For remote access I use OpenVPN server for inbound. Clients connect via whichever WAN responds first. It will also support IP-Sec if you want. Both modes also support site-to-site VPN where you want the connection always active.
on 27-01-2023 21:57