on 09-12-2020 18:59
Anyone else had this recently?
My HUB 3 updated last night.
on 28-01-2021 23:08
Sorry @horseman, I’ve got the original trials Hub3.
on 29-01-2021 08:55
on 08-02-2021 14:30
We've been having endless problems with the SuperHub 3.0 on this firmware. Constantly rebooting itself for weeks now. Do you think running the router in modem mode instead and using my own router would help?
on 08-02-2021 14:38
Yes, always a better option in my opinion however have you tried factory resetting the hub first.
15-02-2021 12:28 - edited 15-02-2021 12:29
I am starting to get more ping spikes on this firmware, after a reboot, it's fine for a little bit then starts again. BQM's look like this:
The spikes are almost like clockwork, even to the SH3 itself. Looks like VM have added something extra that's running in the background now? The Hub3 was already screaming as it is...
Tried a factory reset as well, resolves the problem temporarily... I'm running the SH3 in modem mode and using pfSense as my router.
Edit: Running HW version 10.
on 15-02-2021 23:52
Maybe they have added some code for the new Plume WiFi hardware.
on 16-02-2021 01:16
@Tudor wrote:Maybe they have added some code for the new Plume WiFi hardware.
Maybe they are making things worse, I have a DVD-RW that on play back at a given scene would pause I tried every firmware and then I tried firmware version 0 and it played back fine... I stopped using that drive and got another by another make...too bad we can't do that here we are stuck with what VM throws at us.😞
16-02-2021 11:17 - edited 16-02-2021 11:18
@legacy1 wrote:
@Tudor wrote:Maybe they have added some code for the new Plume WiFi hardware.
Maybe they are making things worse, I have a DVD-RW that on play back at a given scene would pause I tried every firmware and then I tried firmware version 0 and it played back fine... I stopped using that drive and got another by another make...too bad we can't do that here we are stuck with what VM throws at us.😞
Problem is, the SuperHub 3 is already underpowered as it is. Why add more stress on the hardware? More importantly, when running in modem mode, why aren't all those extra bits and pieces of code just not turned off?
The whole experience with Virgin media is just a faff, I'm glad other better FTTH providers are coming to my area. For starters I can ditch this crappy Superhub.
16-02-2021 14:04 - edited 16-02-2021 14:14
Today's graphs, also seeing packet loss:
Anyone else noticed similar after the upgrade to this firmware?
EDIT: not sure why the screenshot was rejected. But it's similar to my previous one but now it's happening all the time.
20-05-2021 19:17 - edited 20-05-2021 19:17
Forid200, love that your using grafana!