Menu
Reply
noisyjack
  • 6
  • 0
  • 0
Tuning in
107 Views
Message 11 of 12
Flag for a moderator

Re: iPad recording playback

Hi Paulina,

Thanks for your reply, as stated previously, if I put the WiFi access points on the same subnet as my 360 box it works, so it's not a WiFi issue.

I have to run a number of insecure devices on my network that aren't designed to be connected to the internet for work, which the iPad's also require access to.

I'm trying to configure the network such that I can have my work devices, WiFi access points and other network devices on separate subnets and route traffic between them as required, without having my work devices connected to the internet as far as is practical.

If the method used by the iPad app to identify whether the device is on the same network is literally whether it's the same subnet then I'll stop trying as that's not something I want to do. 

When I have some time the next thing I'm going to try and do is identify if it's really just comparing the first three octet. For instance would the iPad app consider the networks 10.47.0.1/25 and 10.47.0.128/25 to be the same subnet even though they're not as long as there was routing between them?

0 Kudos
Reply
Martin_N
  • 8.05K
  • 339
  • 495
Forum Team
Forum Team
93 Views
Message 12 of 12
Flag for a moderator

Re: iPad recording playback

Thank you for your response noisyjack. With regards to your query about the networks. This isn't something we would be able to advise on as you are using a 3rd party network for this and this isn't something we are trained on. 

Due to this we wouldn't be able to advise further on your specific query. As you have advised the app is working fine when the hub is normally setup in router mode we can only advise speaking with the company that provide your 3rd party network for further assistance.

^Martin

0 Kudos
Reply