Not had chance to BUT it was turned off and router rebooted. Speed came back up for a while but now back to <1mb again.
Have now drive all the coax connectors inside and outside. Son said they were very tight but has undone and done back up finger tight as instructed.
Speed still really bad ☹️
thanks for the help to date but still got the problem. Did a full reset today and speed is still <1mb
Any more suggestions guys?
Live BQM LINK
Can't stress enough the importance of checking each and every coax connection, inside and outside. I resolved a similar problem this week by doing exactly this.
Found this answer helpful? Share it!
Son went thru all of them, undid and back to finger tight as advised. But will see if I can get one of family to go back thru and check again
I've escalated that for a staff response. Nothing obviously wrong with the power levels or noise, but BQM is real Hammer Horror material
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
Good Morning JustJaneP,
Thanks for your post on our Community Forums and I'm terribly sorry to see you've been having service issues with the broadband services.
I've been able to look into the stats of the hub, and everything appears to be within spec. In addition, there appears to be no timeouts on the equipment
Our systems are showing a possible Wi-Fi fault, can you tell me if you have slow speeds over a wired connection? Can you also tell me if your speed issues occur in the same room as the hub?
It would also be handy to know if the Wi-Fi extended can be temporarily removed to see of this improves the service at all?
We removed the extender temporarily and it made no difference. It is currently back on but will take off again.
Speed is slow on wired and WiFi.
WiFi speed is slow in all rooms including near hub. The connection strength in WiFi is fine it's just the <1mb speed! We are all relying on 4g now instead ☹️
Have asked other son to double check the physical connections today as I can't get down low enough to do them. Might take a while for him to get up!