I put my hub 3 into modem mode, and connected to tplink router - from Port 1 on hub to Internet on router. Except the logo on top of the router is now red - "no internet". I read somewhere that I should put the router into wireless router mode - except on the Advanced / Operation Mode page - there is only Router and Access Point options. Please help.
Reset your tplink router put hub in modem mode then power off the hub for 2mins power on the tplink router and have it be the only thing connecting to the hub then power on the hub and wait 5mins you should have internet by the tplink router.
Should all this not work and it should then power off the hub with it in modem mode for 2min connect only a PC to the hub and power on you may need to unplug and replug the Ethernet to get internet then log in to your tplink router and use the clone option to copy your PC MAC to your router then connect tplink router to the hub.
I reset / disconnect / reboot in various sequences last night and didn't work. I enabled the Clone MAC option this morning (before heading to work) - and it seemed to work. I will check / retry this evening. Thanks for the detail.