Menu
Reply
Mikethomas39
  • 3
  • 0
  • 0
Joining in
107 Views
Message 1 of 5
Flag for a moderator

Wifi networks not available on Hub 3

I have had a few power spikes over the past 48hrs. Due to power outages in my street.  I am able to connect to the ethernet hub on my Hub3, but none of my wifi 5.0 or 2.4 networks are showing as available. When I run diagnostics from the HUB, the diagnostics starts, but drops and defaults back to home page on Router. I suspect the Hub is fried, from power spikes Any help would be appreciated. 

Regards, 

Mike

0 Kudos
Reply
-tony-
  • 16.35K
  • 1.3K
  • 3.84K
Very Insightful Person
Very Insightful Person
105 Views
Message 2 of 5
Flag for a moderator

Re: Wifi networks not available on Hub 3

VM will get to the thread but that might take a few days - you need to ring to get a quicker reply

had you in the past renamed the ssid's for the wifi - if the power spikes had caused a reset they would have revered to default as would the passwords if you had changed them

____________________

Tony
0 Kudos
Reply
Mikethomas39
  • 3
  • 0
  • 0
Joining in
100 Views
Message 3 of 5
Flag for a moderator

Re: Wifi networks not available on Hub 3

Thanks Tony, 

They are still visible as their original names in the config? do you suggest i remove them and add them back?

Regards, 

0 Kudos
Reply
-tony-
  • 16.35K
  • 1.3K
  • 3.84K
Very Insightful Person
Very Insightful Person
92 Views
Message 4 of 5
Flag for a moderator

Re: Wifi networks not available on Hub 3

i think the next action is a full reset - as above that will set everything back to default - hold the button a good 30 sec

if you cannot then connect it suggests bigger problems and i would guess a new hub would be needed

____________________

Tony
0 Kudos
Reply
Mikethomas39
  • 3
  • 0
  • 0
Joining in
86 Views
Message 5 of 5
Flag for a moderator

Re: Wifi networks not available on Hub 3

Cheers, will try a full reset. 

0 Kudos
Reply