Menu
Reply
whizzo9
  • 16
  • 0
  • 1
Tuning in
40 Views
Message 11 of 12
Flag for a moderator

Re: Router lights

That worked very well. All lights out except base light and all devices connected working OK. Thanks for your suggestion John.

Alan


@jbrennand wrote:
See what the tech says in the meantime - do a Hub “pinhole reset” - make sure the 2 passwords on the Hub sticker are still there and legible first ! Disconnect any ethernet cables from the Hub, and then with the Hub still "switched on" throughout, press pin in firmly with paper clip/SIM tray tool or similar "thin thing" and hold it firmly for at least 60 seconds, release the pin, leave for 10’ to stabilise - dont manually switch it off at any time.

See if that sorts it

 

0 Kudos
Reply
whizzo9
  • 16
  • 0
  • 1
Tuning in
30 Views
Message 12 of 12
Flag for a moderator

Re: Router lights

Thanks. This appeared to work. Why remove ethernet ca bles and why hold for 60 secs.?

0 Kudos
Reply