Menu
Reply
Highlighted
  • 1
  • 0
  • 0
Joining in
283 Views
Message 1 of 3
Flag for a moderator

Port forwarding not working after switching from hub 2 to hub 3

Port forwarding not working after switching (and re-adding the settings to the new hub) from hub 2 to hub 3, port 80 and 443 (I run a web server), I changed the ISP to point to the new IP address over 24 hours ago, but just not getting through the new hub ? 99% sure it's a hub problem after having run tracert, DNS and ping checks

0 Kudos
Reply
  • 7.11K
  • 556
  • 1.19K
Legend
271 Views
Message 2 of 3
Flag for a moderator

Re: Port forwarding not working after switching from hub 2 to hub 3

If you are using the default VM DNS servers updates can take up to 48 hours to be applied. You could try 1.1.1.1 or 8.8.8.8 as DNS servers. 


Tudor
There are 10 types of people: those who understand binary and those who don't and F people out of 10 who do not understand hexadecimal c1a2a285948293859940d9a49385a2
0 Kudos
Reply
Highlighted
  • 13.61K
  • 553
  • 1.27K
Alessandro Volta
271 Views
Message 3 of 3
Flag for a moderator

Re: Port forwarding not working after switching from hub 2 to hub 3

Try the hub in modem mode see if gets traffic to the web server then think about getting your own router with 1Gb ports.

---------------------------------------------------------------
BQM, Test for outgoing ports and L2TP VPN test
0 Kudos
Reply