Virgin Media Community

[vmuser4321]

One thing I don't understand is why the Superhub's Network Log is missing.  Can you explain.  Also I've now checked for faults using the Status Webpage and the 0800 phone. Both said there is a fault.  See below:

[jbrennand]

Logs not showing is a common glitch in the Hub's firmware - a firmware update may sort it when it comes - or try a 60 second pinhole Hb reset

You have a known issue - not much you can do till itds fixed. Keep checking the 0800 number. Until it is fixed any Tech visits are auto-cancelled

[vmuser4321]

Thanks jbrennand. This is no reflection on you as I know you're trying your best to help me, but I feel like I've hit a brick wall because I've been waiting for weeks for this to resolve, VM first arranged a Techy, but as you mentioned that the Techy must have subsequently got auto-cancelled.

Surely they need to give me a timeline when this will be resolved? The OP of this thread was assisted by one of the Mods in getting their issue resolved, why can't I get the same assistance? VM can't simply brush me aside and make me wait endlessly for a resolution as like many, I am also a paying customer.

I must also add that when I check the status page multiple times, it keeps changing from Intermittent Fault to no issues:-

[legacy1]

---

@vmuser4321 wrote:
I'm in normal router mode.

I have the following devices connected on ethernet cables:-
1. Asus RT-AX82U router

---

put hub in modem mode over night with that router and see if Packet loss happens

[vmuser4321]

Thanks legacy1. That's a good idea, although not sure if putting it in modem mode will still allow BQM to work. But you've also given me food for thought.

I have just pressed the reset button on the Superhub and it's back to Factory Default.  First thing I've noticed is that the Network Log which had previously disappeared is now showing:

Network Log

Time Priority Description

Thu 01/01/1970 00:01:24	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 24/11/2022 17:58:59	5	MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 24/11/2022 17:59:14	5	DBC-REQ Mismatch Between Calculated Value for P1.6hi Compared to CCAP Provided Value;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 24/11/2022 17:59:14	6	US profile assignment change. US Chan ID: 14; Previous Profile: ; New Profile: 11.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 24/11/2022 17:59:28	6	CM-STATUS message sent. Event Type Code: 16; Chan ID: 159; DSID: N/A; MAC Addr: N/A; OFDM/OFDMA Profile ID: 3.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;

[legacy1]

---

@vmuser4321 wrote:

Thanks legacy1. That's a good idea, although not sure if putting it in modem mode will still allow BQM to work. But you've also given me food for thought.

---

Of course it will work your router replies to the BQM ping when enabled in your router plus update your new IP for BQM   

[vmuser4321]

That's brilliant. If you take a look at the BQM graph, so far touchwood, there's not been any packet loss. I'll hold out until there's an issue. Will keep you posted.

Thanks again for your help.

[vmuser4321]

Hi guys,

I'm so stressed out.  I'm afraid I'm back again with the same issue. My internet has started to intermittently drop for approx a week now.  Previously it was in the evening, but now it's happening throughout the day (approx every hour). I have tried rebooting the router, but this hasn't solved the issue. My suspicion is that the Superhub4 router is either faulty or can't cope with the Gig1 connection.  Do I need a Superhub 5?

The issue is very similar to the one mentioned on this thread:-

https://community.virginmedia.com/t5/Networking-and-WiFi/Internet-Intermittently-Cutting-Out/td-p/43...

To help assist you, here is my BQM chart:-

Please can you help me?

[jpeg1]

Looking at your downstream data, there is a substantial drop in the levels going from the lowest to the highest frequency channels.  They are all within spec, but the tilt is sometimes due to a poor connection or cable fault, either inside or outside the house.  And that might explain the intermittent dropouts.

Just to eliminate this as a possible cause, check that all the coax connections indoors are fitted tightly and that the cable is not kinked or crushed.

[vmuser4321]

Hi jpeg1, thanks for your reply.

I've gone over and checked and our cable wiring is perfect with no kinks nor any crushed cable. This issue seems to be happening with other people too, in which case I think it's either outside cable/cabinet issue or network issue.

What shall I do as this is driving me nuts?