For the past three weeks i have been struggling getting the hub 4 to work with my pfsense build. The pfsense router does get a WAN ip address from the hub 4 (which is in modem mode) however there is no internet connectivity. Pinging 22.214.171.124 from the pfsense does not work and there are no replies, nor can i ping any websites from client nodes.
Been absolutely picking my brain on this issue and would appreciate any help 🙏
FYI - pfsense (custom build ) was configured in advance before installation but only things such as subnets and DNS servers were configured.
Well like a say I tested pfsense in a VM as in by VirtualBox so specs don't really mean any thing but the host is a i5-11400 and the WAN was with a USB 3.0 to RJ45 with VM by bridge as intel pro/1000 MT.
But its odd your getting DHCP to work and get a IP so the rest should work
You appear to be using two LAN ranges 10.0.0.0/24 and 10.0.10.0/24. For neatness when using RFC1918 address ranges I wouldn't advise using the /8 range. If all you need are a pair of /24 stick to 192.168.0.0 subnets.
Are you getting an address assigned. Your WAN interface definition for IPv4 is DHCP. The interface should show up in the dashboard.
The above is working with Hub4. As indicated by the fact I am using LAGG to achieve full throughput.
I use one of these for my pfsense, all interface worked out the box so no extra drivers to add to the underlying freeBSD