Showing results for 
Search instead for 
Did you mean: 

Flashing red, no broadband or tv (cuts out)

Joining in

Hi, I’ve rebooted the router a few times. But I’m not getting any broadband or tv (cuts out CS2400). Checked wires etc.. was working fine about an hour ago. Checked status it did smash a problem, then it cleared? 

need broadband for work?





Very Insightful Person
Very Insightful Person

Check with Area faults on 0800 561 0061 If you have a VM landline 150 this goes down to post code level. You could also try the web page status, but this is not recommended as it only covers issues that affect a very large number of customers.

VM will not dispatch any technicians while an area fault exists.

If no area faults found:

The primary place to report faults or for service requests is Customer Services on 0345 454 1111/150 if you have a VM landline or wait two or three days for a VM staff member to get to your post.

There are 10 types of people: those who understand binary and those who don't and F people out of 10 who do not understand hexadecimal c1a2a285948293859940d9a49385a2

Forum Team
Forum Team

Hi Lister, 

Thanks for taking the time to post about your issues in the Community.

We're sorry to hear there were some issues with your Hub and connection. Taking a look at things this end, I can see there was a fault that was open but this has since closed. 

The Hub is also showing as online now and all power and signal levels look good. Can you confirm if things are working OK now or are you still having issues?

Pop back and let us know. 


Forum Team

New around here? Check out the do's and don'ts, in our Community FAQs